Hardrace Volvo P3 Adjustable Rear Camber Arms

Take control of rear-wheel alignment on your Volvo P3 with the Hardrace Adjustable Rear Camber Arms. Designed for the Volvo S60, V60, XC60, V70, XC70 and S80, these uprated rear arms allow the camber angle to be accurately adjusted rather than relying on the limited range available with the standard suspension.

Lowering a Volvo on performance springs or coilovers typically increases negative rear camber. While some negative camber can benefit cornering, excessive camber reduces the tyre's usable contact patch during normal driving and can cause accelerated wear on the inner edge of the tyre.

The Hardrace adjustable camber arms allow an alignment specialist to bring the rear geometry back towards factory specification or fine-tune the camber setting for a more performance-focused chassis setup.

Manufactured from forged aluminium alloy, the arms combine high strength with reduced unnecessary weight. They are supplied with uprated hardened-rubber bushes, providing more precise suspension control than soft or ageing factory bushes while retaining the refinement required for road and fast-road use.

The direct-fit design replaces the original rear camber arms without fabrication, making this an ideal upgrade for lowered P3 Volvos as well as cars undergoing a complete rear suspension refresh.

For the best overall geometry control, these camber arms work particularly well alongside adjustable rear toe arms, allowing both camber and toe to be correctly set after lowering.

A professional four-wheel alignment is essential after installation.

Key Features

• Fully adjustable rear camber – fine-tune rear-wheel alignment to suit your suspension setup
• Ideal for lowered Volvos – correct excessive negative camber introduced by lowering springs or coilovers
• Helps reduce inner tyre wear – allows the tyre contact patch to be optimised through correct alignment
• Forged aluminium construction – strong, lightweight and designed for demanding suspension loads
• Hardened-rubber bushes – improved control with road-friendly levels of noise and vibration
• Improved rear stability – maintains more consistent suspension geometry during cornering
• Direct bolt-on fitment – replaces the factory rear arms without fabrication
• Suitable for road and fast-road builds – performance-focused without requiring spherical bearings
• Ideal with adjustable rear toe arms – allows comprehensive rear geometry adjustment
• Supplied as a pair – complete left and right rear camber arm set

Vehicle Fitment

Volvo P3 Platform

Volvo S60 II

• 2010–2018

Volvo V60

• 2010–2018

Volvo XC60 I

• 2009–2017

Volvo V70 III

• 2007–2016

Volvo XC70 III

• 2007–2016

Volvo S80 II

• 2007–2016

Suitable for applicable vehicles using the corresponding Volvo P3 rear suspension arrangement.

Supplied:
2 x Adjustable rear camber arms

Bush Type:
Hardened rubber

Recommended For:

• Lowered Volvo P3 models
• Coilover-equipped cars
• Performance lowering springs
• Fast-road suspension setups
• Cars suffering excessive negative rear camber
• Vehicles experiencing inner rear tyre wear
• Builds using adjustable rear toe arms

Installation Note: A professional four-wheel alignment is required after installation. Camber and rear toe interact with each other, so both settings should be checked and correctly adjusted after fitting.