{"title":"S80","description":"","products":[{"product_id":"black-diamond-d3-d4-d5-uprated-clutch-kit","title":"Black Diamond D3 D4 D5 Uprated Clutch Kit","description":"\u003cp\u003eBlack Diamond Performance have developed three stages of Performance Clutch Kits – Fast Road, Fast Road\/Competition and a full Race Paddle Clutch capable of handling and transmitting the torque generated, as well as providing a range of other benefits.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUtilising their experience in brake disc technology, all of their clutches have grooves machined into the pressure plate surface. These grooves help to dissipate the heat generated as well as remove the dust and gases created.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFriction disc\u003c\/li\u003e\n\u003cli\u003ePressure plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKit does NOT include flywheel, release bearing aka slave cylinder, flywheel bolts or clutch cover screws. Please contact us if you would like to order any of these items.\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStage 1 - Fast Road\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBlack Diamond’s Stage 1 clutch kit is recommended for vehicles with up to a 20% increase in torque above standard. The clutch disc has a spiral woven glass fibre friction material with a heavy copper core. The glass fibre is a fairly soft material which allows for a smooth engagement of the clutch and consistent performance from low to high temperatures. The added copper in this friction material allows the clutch to perform well at even higher temperatures, as well as improving burst strength (approximately 9000 RPM) and helping to dissipate heat through the material. The strong springs used in Black Diamond’s Stage 1 clutch kit create greater clamping pressure on the clutch disc, providing a more instant response and reducing the chance of unwanted slippage. As the organic compound used in the Stage 1 clutch disc is relatively soft, it also benefits from a minimal breaking in period.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStage 2 - Fast Road \/ Competition\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBlack Diamond’s Stage 2 clutch kit uses an aramid fibre friction material similar to Kevlar and is recommended for vehicles with a torque increase of up to 30%. These clutch kits provide an even stronger clamping pressure than the Stage 1, as well as boasting an even higher burst strength. This is aided by the extreme hardness of the aramid fibre material, which is nevertheless very lightweight. This friction material requires a breaking in period of about 600 miles of gentle use, this is to ensure it reaches it’s full friction qualities. The Stage 2 clutch kit is capable of withstanding the high temperatures associated with competition driving and so is ideal for the track. With the rigidity of these drive plates it's important that all flywheels are checked for wear as any imperfections or dishing of the flywheel will result in loss of contact with the friction material.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStage 3 - Full Race\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBlack Diamond’s Stage 3 clutch kit is recommended for increases in torque of between 30 and 60%. A cerametallic friction material is used, allowing it to cope with extremely high heat and torque. These paddle clutches are an excellent option for track use, heavily modified engines and mapped diesels where the torque increases exponentially. Black Diamond’s Stage 3 clutch kit, with its very high clamp load and stainless steel backing plates ensures that maximum torque is transmitted from the engine to the wheels on the ground with minimum risk of overheating or slipping. Our stage 3 paddle clutch retains the driveability required in normal road use, although some changes to driving style are required (more revs to pull away). We can make your paddle clutch with 4, 5 or 6 paddles depending on the diameter of the drive plate.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMaking the right choice of clutch for your vehicle and driving style is important. However, you can rest assured that whatever Black Diamond clutch kit you choose, it will be made to order from the highest quality materials. To ensure the quality and precision of manufacture expected of a Black Diamond clutch kit, all our clutches are individually tested for lift and load. Our clutch kits are also designed to be direct replacements for a vehicle’s standard clutch, meaning no alteration to the flywheel or any other standard part is necessary.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note all Black Diamond Clutch Kits are made to order and have a lead time of 7-10 working days before dispatch.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003eVolvo C30 D3 Manual 2010+\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eVolvo C30 D4 Manual 2010+\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eVolvo C30 D5 Manual 2006+\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eVolvo C70 Mk2  D3 Manual 2010+\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eVolvo C70 Mk2  D4 Manual 2010+\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eVolvo C70 Mk2  D5 Manual 2006+\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003eVolvo S40 Mk2 D3 Manual 2010+\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eVolvo S40 Mk2 D4 Manual 2010+\u003cbr\u003eVolvo S40 Mk2 D5 Manual 2006+\u003cbr\u003eVolvo S60 Mk1 D5 Manual 2005-2010\u003cbr\u003eVolvo S60 Mk2 D3 Manual 2010-2014\u003cbr data-mce-fragment=\"1\"\u003eVolvo S60 Mk2 D4 Manual 2010-2014\u003cbr data-mce-fragment=\"1\"\u003eVolvo S60 Mk2 D5 Manual 2010-2011\u003cbr\u003eVolvo S80 Mk2 D3 Manual 2010+\u003cbr\u003eVolvo S80 Mk2 D4 Manual 2010+\u003cbr\u003eVolvo S80 Mk2 D5 Manual 2010+\u003cbr\u003eVolvo V40 Mk2 D3 Manual 2012-2015\u003cbr data-mce-fragment=\"1\"\u003eVolvo V40 Mk2 D4 Manual 2012-2015\u003cbr\u003eVolvo V50 D3 Manual 2010-2012\u003cbr data-mce-fragment=\"1\"\u003eVolvo V50 D4 Manual 2010-2012\u003cbr\u003eVolvo V50 D5 Manual 2006+\u003cbr\u003eVolvo V60 D3 Manual 2010-2015\u003cbr data-mce-fragment=\"1\"\u003eVolvo V60 D4 Manual 2010-2015\u003cbr\u003eVolvo V60 D5 Manual 2010-2015\u003cbr\u003eVolvo V70 Mk2 D5 Manual 2005-2007\u003cbr\u003eVolvo V70 Mk3 D3 Manual 2010-2015\u003cbr\u003eVolvo V70 Mk3 D4 Manual 2010-2015\u003cbr\u003eVolvo V70 Mk3 D5 Manual 2007-2011\u003cbr\u003eVolvo XC60 D3 Manual 2010-2015\u003cbr\u003eVolvo XC60 D4 Manual 2010-2015\u003cbr\u003eVolvo XC60 2.4d Manual 2009-2010\u003cbr\u003eVolvo XC70 D3 Manual 2010-2015\u003cbr data-mce-fragment=\"1\"\u003eVolvo XC70 2.4d Manual 2009-2010\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003ePlease contact us if you are not sure on fitment with your vehicle\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Diamond","offers":[{"title":"Stage 1 Organic Clutch Kit","offer_id":39392813187166,"sku":"BDP3091-PWR","price":445.0,"currency_code":"GBP","in_stock":true},{"title":"Stage 2 Kevlar Clutch Kit","offer_id":39392813219934,"sku":"BDP3091-KVR","price":480.0,"currency_code":"GBP","in_stock":true},{"title":"Stage 3 Paddle Clutch Kit","offer_id":39392813252702,"sku":"BDP3091-PDL","price":650.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/products\/Stage1OrganicClutch.jpg?v=1624548226"},{"product_id":"black-diamond-t5-uprated-clutch-kit","title":"Black Diamond T5 Uprated Clutch Kit","description":"\u003cp\u003eBlack Diamond Performance have developed three stages of Performance Clutch Kits – Fast Road, Fast Road\/Competition and a full Race Paddle Clutch capable of handling and transmitting the torque generated, as well as providing a range of other benefits.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUtilising their experience in brake disc technology, all of their clutches have grooves machined into the pressure plate surface. These grooves help to dissipate the heat generated as well as remove the dust and gases created.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFriction disc\u003c\/li\u003e\n\u003cli\u003ePressure plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKit does NOT include flywheel, release bearing aka slave cylinder, flywheel bolts or clutch cover screws. Please contact us if you would like to order any of these items.\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStage 1 - Fast Road\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBlack Diamond’s Stage 1 clutch kit is recommended for vehicles with up to a 20% increase in torque above standard. The clutch disc has a spiral woven glass fibre friction material with a heavy copper core. The glass fibre is a fairly soft material which allows for a smooth engagement of the clutch and consistent performance from low to high temperatures. The added copper in this friction material allows the clutch to perform well at even higher temperatures, as well as improving burst strength (approximately 9000 RPM) and helping to dissipate heat through the material. The strong springs used in Black Diamond’s Stage 1 clutch kit create greater clamping pressure on the clutch disc, providing a more instant response and reducing the chance of unwanted slippage. As the organic compound used in the Stage 1 clutch disc is relatively soft, it also benefits from a minimal breaking in period.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStage 2 - Fast Road \/ Competition\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBlack Diamond’s Stage 2 clutch kit uses an aramid fibre friction material similar to Kevlar and is recommended for vehicles with a torque increase of up to 30%. These clutch kits provide an even stronger clamping pressure than the Stage 1, as well as boasting an even higher burst strength. This is aided by the extreme hardness of the aramid fibre material, which is nevertheless very lightweight. This friction material requires a breaking in period of about 600 miles of gentle use, this is to ensure it reaches it’s full friction qualities. The Stage 2 clutch kit is capable of withstanding the high temperatures associated with competition driving and so is ideal for the track. With the rigidity of these drive plates it's important that all flywheels are checked for wear as any imperfections or dishing of the flywheel will result in loss of contact with the friction material.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStage 3 - Full Race\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBlack Diamond’s Stage 3 clutch kit is recommended for increases in torque of between 30 and 60%. A cerametallic friction material is used, allowing it to cope with extremely high heat and torque. These paddle clutches are an excellent option for track use, heavily modified engines and mapped diesels where the torque increases exponentially. Black Diamond’s Stage 3 clutch kit, with its very high clamp load and stainless steel backing plates ensures that maximum torque is transmitted from the engine to the wheels on the ground with minimum risk of overheating or slipping. Our stage 3 paddle clutch retains the driveability required in normal road use, although some changes to driving style are required (more revs to pull away). We can make your paddle clutch with 4, 5 or 6 paddles depending on the diameter of the drive plate.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMaking the right choice of clutch for your vehicle and driving style is important. However, you can rest assured that whatever Black Diamond clutch kit you choose, it will be made to order from the highest quality materials. To ensure the quality and precision of manufacture expected of a Black Diamond clutch kit, all our clutches are individually tested for lift and load. Our clutch kits are also designed to be direct replacements for a vehicle’s standard clutch, meaning no alteration to the flywheel or any other standard part is necessary.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note all Black Diamond Clutch Kits are made to order and have a lead time of 7-10 working days before dispatch.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003eVolvo C30 2.5L T5 Manual 2007+\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eVolvo C70 Mk2 2.5L T5 Manual 2006+\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolvo S40 Mk2\u003cspan data-mce-fragment=\"1\"\u003e 2.5L\u003c\/span\u003e T5 Manual 2004+\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003eVolvo S80 Mk2 2.5L T5 Manual 2006+\u003cbr\u003eVolvo V50 2.5L T5 Manual 2004+\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eVolvo V70 Mk3 2.5L T5 Manual 2007-2009\u003cbr\u003eVolvo V70 Mk3 2.5L T5 Manual 2008-2012\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003ePlease contact us if you are not sure on fitment with your vehicle\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Diamond","offers":[{"title":"Stage 1 Organic Clutch Kit","offer_id":39734785212510,"sku":"BDC3018-PWR","price":500.0,"currency_code":"GBP","in_stock":true},{"title":"Stage 2 Kevlar Clutch Kit","offer_id":39734785245278,"sku":"BDC3018-KVR","price":575.0,"currency_code":"GBP","in_stock":true},{"title":"Stage 3 Paddle Clutch Kit","offer_id":39734785278046,"sku":"BDC3018-PDL","price":725.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/products\/Stage1OrganicClutch_b768d4ab-d02c-4774-be58-a343b9e3eafb.jpg?v=1656933724"},{"product_id":"hardrace-volvo-p3-front-lower-control-arms","title":"Hardrace Volvo P3 Uprated Front Lower Control Arms","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eRefresh and strengthen the front suspension of your Volvo P3 with the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eHardrace Uprated Front Lower Control Arms\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Designed for selected Volvo S60, V60, V70 and S80 models, these complete replacement wishbones combine heavy-duty steel construction with Hardrace hardened-rubber bushes for improved steering precision, suspension control and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe front lower control arms play a major role in locating the front wheels under braking, acceleration and cornering. As the original bushes wear and soften, additional movement can develop within the suspension, leading to vague steering response, inconsistent geometry and a less controlled front end.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eRather than pressing new bushes into ageing factory arms, the Hardrace kit replaces the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ecomplete left and right lower control arm assemblies\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. This makes it an excellent option for higher-mileage Volvos as well as fast-road and modified cars requiring a comprehensive front suspension refresh.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eHardrace manufactures the arms from \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ehardened steel\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and uses uprated \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ehardened-rubber bushes\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e to reduce unwanted suspension movement while retaining the refinement expected from a road car. This provides a more direct and controlled feel without moving to very stiff polyurethane or solid spherical joints.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe arms also receive an \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eED treatment and painted finish\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e to improve corrosion resistance and durability – particularly useful for vehicles driven year-round in UK road conditions. Hardrace describes the arms as an OE-style direct replacement equipped with premium-quality bushes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThese control arms are particularly well suited to Volvos running \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003elowering springs, coilovers, uprated anti-roll bars, performance tyres or increased power\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, where keeping the front suspension geometry properly controlled becomes even more important.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eImportant:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e These arms do \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enot\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e fit vehicles equipped with the factory aluminium front wishbones and are \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enot suitable for the Volvo XC70\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eA professional wheel alignment is recommended after installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Features \/ Selling Points\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eComplete front control arm pair\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – supplied as left and right lower wishbones\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHardened steel construction\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – designed for increased strength and durability\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHardened-rubber bushes\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – improved suspension control without excessive NVH\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSharper steering response\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – reduces unwanted movement from worn factory bushes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eImproved chassis control\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – helps maintain more consistent front geometry under load\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eOE-style direct replacement\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – installs using the original suspension mounting points\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eED treated and painted\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – enhanced corrosion protection for long-term road use\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIdeal suspension refresh\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – replaces complete ageing arms rather than only the bushes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSuitable for road and fast-road builds\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – works well with standard or upgraded suspension\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSupplied as a 2-piece set\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – complete front axle control arm replacement\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eVehicle Fitment\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo P3 Platform\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo S60 II\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo V60\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo V70 III\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo S80 II\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eImportant Fitment Restrictions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eDoes NOT fit vehicles equipped with aluminium factory front wishbones.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eDoes NOT fit Volvo XC70 models.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIf you are unsure whether your vehicle uses steel or aluminium front wishbones, check the existing arms before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eSupplied:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x Left front lower control arm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Right front lower control arm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eBush Type:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Hardened rubber\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eConstruction:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Hardened steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eInstallation:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e OE-style direct replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA professional four-wheel alignment is recommended after installation.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":39905481228382,"sku":"HR0030874","price":635.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/products\/8583_main.jpg?v=1675432523"},{"product_id":"black-diamond-d3-d4-d5-uprated-clutch-kit-copy","title":"Black Diamond D3 D4 2014- Uprated Clutch Kit VEA","description":"\u003cp\u003eBlack Diamond Performance have developed three stages of Performance Clutch Kits – Fast Road, Fast Road\/Competition and a full Race Paddle Clutch capable of handling and transmitting the torque generated, as well as providing a range of other benefits.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUtilising their experience in brake disc technology, all of their clutches have grooves machined into the pressure plate surface. These grooves help to dissipate the heat generated as well as remove the dust and gases created.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFriction disc\u003c\/li\u003e\n\u003cli\u003ePressure plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKit does NOT include flywheel, release bearing aka slave cylinder, flywheel bolts or clutch cover screws. Please contact us if you would like to order any of these items.\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStage 1 - Fast Road\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBlack Diamond’s Stage 1 clutch kit is recommended for vehicles with up to a 20% increase in torque above standard. The clutch disc has a spiral woven glass fibre friction material with a heavy copper core. The glass fibre is a fairly soft material which allows for a smooth engagement of the clutch and consistent performance from low to high temperatures. The added copper in this friction material allows the clutch to perform well at even higher temperatures, as well as improving burst strength (approximately 9000 RPM) and helping to dissipate heat through the material. The strong springs used in Black Diamond’s Stage 1 clutch kit create greater clamping pressure on the clutch disc, providing a more instant response and reducing the chance of unwanted slippage. As the organic compound used in the Stage 1 clutch disc is relatively soft, it also benefits from a minimal breaking in period.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStage 2 - Fast Road \/ Competition\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBlack Diamond’s Stage 2 clutch kit uses an aramid fibre friction material similar to Kevlar and is recommended for vehicles with a torque increase of up to 30%. These clutch kits provide an even stronger clamping pressure than the Stage 1, as well as boasting an even higher burst strength. This is aided by the extreme hardness of the aramid fibre material, which is nevertheless very lightweight. This friction material requires a breaking in period of about 600 miles of gentle use, this is to ensure it reaches it’s full friction qualities. The Stage 2 clutch kit is capable of withstanding the high temperatures associated with competition driving and so is ideal for the track. With the rigidity of these drive plates it's important that all flywheels are checked for wear as any imperfections or dishing of the flywheel will result in loss of contact with the friction material.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStage 3 - Full Race\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBlack Diamond’s Stage 3 clutch kit is recommended for increases in torque of between 30 and 60%. A cerametallic friction material is used, allowing it to cope with extremely high heat and torque. These paddle clutches are an excellent option for track use, heavily modified engines and mapped diesels where the torque increases exponentially. Black Diamond’s Stage 3 clutch kit, with its very high clamp load and stainless steel backing plates ensures that maximum torque is transmitted from the engine to the wheels on the ground with minimum risk of overheating or slipping. Our stage 3 paddle clutch retains the driveability required in normal road use, although some changes to driving style are required (more revs to pull away). We can make your paddle clutch with 4, 5 or 6 paddles depending on the diameter of the drive plate.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMaking the right choice of clutch for your vehicle and driving style is important. However, you can rest assured that whatever Black Diamond clutch kit you choose, it will be made to order from the highest quality materials. To ensure the quality and precision of manufacture expected of a Black Diamond clutch kit, all our clutches are individually tested for lift and load. Our clutch kits are also designed to be direct replacements for a vehicle’s standard clutch, meaning no alteration to the flywheel or any other standard part is necessary.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note all Black Diamond Clutch Kits are made to order and have a lead time of 7-10 working days before dispatch.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003eVolvo V40 Mk2 D3 Manual 2015-2018 VEA\u003cbr data-mce-fragment=\"1\"\u003eVolvo V40 Mk2 D4 Manual 2015-2018 VEA \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003ePlease contact us if you are not sure on fitment with your vehicle\u003c\/span\u003e\u003c\/p\u003e","brand":"Black Diamond","offers":[{"title":"Stage 1 Organic Clutch Kit","offer_id":54897596596601,"sku":"BDC 3318 PWR","price":550.0,"currency_code":"GBP","in_stock":true},{"title":"Stage 2 Kevlar Clutch Kit","offer_id":54897596629369,"sku":"BDC 3318 KVR","price":625.0,"currency_code":"GBP","in_stock":true},{"title":"Stage 3 Paddle Clutch Kit","offer_id":54897596662137,"sku":"BDC 3318 PDL","price":750.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/products\/Stage1OrganicClutch.jpg?v=1624548226"},{"product_id":"genuine-volvo-steering-wheel-badge-p3-model-wheels","title":"Genuine Volvo Steering Wheel Badge - P3 Model Wheels.","description":"\u003cp\u003eBrand new \u003cstrong data-end=\"440\" data-start=\"395\"\u003eGenuine Volvo steering wheel emblem badge\u003c\/strong\u003e in classic blue and chrome finish — ideal replacement for worn, faded, or damaged centre badges. Designed to fit Volvo steering wheel centre caps on a wide range of models. Looks great and restores that original Volvo appearance. Simple peel-and-stick adhesive backing for easy installation. Genuine Volvo quality and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment \/ Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONFIRM STEERING WHEEL MODEL IN PHOTOS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis genuine Volvo steering wheel emblem fits a wide range of Volvo vehicles, including (but not limited to): \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 (2011 onwards)\u003c\/li\u003e\n\u003cli\u003eVolvo V40 (2013 onwards)\u003c\/li\u003e\n\u003cli\u003eVolvo V60 (selected years)\u003c\/li\u003e\n\u003cli\u003eVolvo V70 (various models)\u003c\/li\u003e\n\u003cli\u003eVolvo XC60 (various years)\u003c\/li\u003e\n\u003cli\u003eVolvo XC70 (various models)\u003c\/li\u003e\n\u003cli\u003eVolvo S80 (selected years)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: If your model year is early\/late fitment or special edition, check dimensions to confirm exact fit.\u003c\/p\u003e","brand":"Genuine Volvo","offers":[{"title":"Default Title","offer_id":56345171100025,"sku":"31467395","price":9.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/IMG_20251211_142445079.jpg?v=1765547291"},{"product_id":"genuine-volvo-front-grille-emblem-blue-chrome-oem-badge-11-5cm","title":"Genuine Volvo Front Grille Emblem – Blue \u0026 Chrome OEM Badge 11.5cm","description":"\u003cp data-start=\"1179\" data-end=\"1466\"\u003eRefresh the front styling of your Volvo with this \u003cstrong data-start=\"1247\" data-end=\"1290\"\u003egenuine Volvo front grille emblem badge\u003c\/strong\u003e, featuring the classic blue and chrome Volvo logo finish. This high-quality OEM badge is designed to replace worn, faded, or missing logos on the front grille of your vehicle.\u003c\/p\u003e\n\u003cp data-start=\"1468\" data-end=\"1689\"\u003eConstructed to Volvo’s original equipment standards, this emblem provides a durable finish and exact visual match to factory styling. Easy adhesive backing allows quick installation directly onto the front grille surface.\u003c\/p\u003e\n\u003cp data-start=\"1691\" data-end=\"1703\"\u003e\u003cstrong data-start=\"1691\" data-end=\"1703\"\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1706\" data-end=\"1751\"\u003e\u003cstrong data-start=\"1706\" data-end=\"1749\"\u003eGenuine Volvo front grille emblem badge\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-start=\"1754\" data-end=\"1807\"\u003eBlue and chrome finish for authentic OEM appearance\u003c\/li\u003e\n\u003cli data-start=\"1810\" data-end=\"1863\"\u003eLong-lasting construction designed for exterior use\u003c\/li\u003e\n\u003cli data-start=\"1866\" data-end=\"1908\"\u003ePeel-and-stick adhesive for easy fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1910\" data-end=\"2006\"\u003e\u003cstrong data-start=\"1910\" data-end=\"1937\"\u003eCompatibility \/ Fitment\u003c\/strong\u003e\u003cbr data-start=\"1937\" data-end=\"1940\"\u003eThis emblem is suitable for a range of Volvo vehicles including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"2009\" data-end=\"2044\"\u003eVolvo \u003cstrong\u003eC30, S40, V50, C70\u003c\/strong\u003e Late Grilles\u003c\/li\u003e\n\u003cli data-start=\"2009\" data-end=\"2044\"\u003eVolvo \u003cstrong data-start=\"2015\" data-end=\"2042\"\u003eV40 \/ V40CC (2013–2016)\u003c\/strong\u003e\u003cstrong data-start=\"2015\" data-end=\"2042\"\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2047\" data-end=\"2062\"\u003eVolvo \u003cstrong data-start=\"2053\" data-end=\"2060\"\u003eS60\u003c\/strong\u003e\u003cstrong data-start=\"2053\" data-end=\"2060\"\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2065\" data-end=\"2080\"\u003eVolvo \u003cstrong data-start=\"2071\" data-end=\"2078\"\u003eV60\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2083\" data-end=\"2098\"\u003eVolvo \u003cstrong data-start=\"2089\" data-end=\"2096\"\u003eV70\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2101\" data-end=\"2116\"\u003eVolvo \u003cstrong data-start=\"2107\" data-end=\"2114\"\u003eS80\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2119\" data-end=\"2135\"\u003eVolvo \u003cstrong data-start=\"2125\" data-end=\"2133\"\u003eXC60\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2138\" data-end=\"2272\"\u003eVolvo \u003cstrong data-start=\"2144\" data-end=\"2152\"\u003eXC90\u003c\/strong\u003e\u003cbr data-start=\"2152\" data-end=\"2155\"\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease measure your badge size before ordering - the correct width should be 11.5cm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"2274\" data-end=\"2293\"\u003e\u003cstrong data-start=\"2274\" data-end=\"2293\"\u003eWhat’s Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"2294\" data-end=\"2355\"\u003e\n\u003cli data-start=\"2294\" data-end=\"2355\"\u003e\n\u003cp data-start=\"2296\" data-end=\"2355\"\u003e1 × Genuine Volvo front grille emblem badge (blue \u0026amp; chrome)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Genuine Volvo","offers":[{"title":"Default Title","offer_id":56345308922233,"sku":"31467395","price":16.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/IMG_20251211_150031949.jpg?v=1765547299"},{"product_id":"alg-performance-3-stainless-steel-downpipe-dpf-delete-volvo-d5-manual","title":"D5 3\" Stainless Steel Downpipe \u0026 DPF Delete – (Manual)","description":"\u003cp data-end=\"788\" data-start=\"418\"\u003eThe \u003cstrong data-end=\"499\" data-start=\"422\"\u003eALG Performance 3-inch (76 mm) stainless steel downpipe \u0026amp; DPF delete pipe\u003c\/strong\u003e is engineered for maximum exhaust flow on \u003cstrong data-end=\"581\" data-start=\"542\"\u003eVolvo D5 manual transmission models\u003c\/strong\u003e. Designed for off-road and track use, this high-flow system removes the restrictive factory downpipe and DPF section, significantly improving exhaust gas flow, turbo response and overall engine performance.\u003c\/p\u003e\n\u003cp data-end=\"1117\" data-start=\"790\"\u003eManufactured in the UK from \u003cstrong data-end=\"838\" data-start=\"808\"\u003ehigh-grade stainless steel\u003c\/strong\u003e, the pipe features a \u003cstrong data-end=\"896\" data-start=\"860\"\u003ecustom laser-cut mounting flange\u003c\/strong\u003e, fully \u003cstrong data-end=\"934\" data-start=\"904\"\u003eTIG welded and back-purged\u003c\/strong\u003e for superior strength and durability. A \u003cstrong data-end=\"1020\" data-start=\"975\"\u003ehigh-quality stainless ILOK flexi section\u003c\/strong\u003e is incorporated to reduce stress, accommodate engine movement and improve long-term reliability.\u003c\/p\u003e\n\u003cp data-end=\"1299\" data-start=\"1119\"\u003eWith its \u003cstrong data-end=\"1152\" data-start=\"1128\"\u003emandrel-bent 3\" bore\u003c\/strong\u003e, this downpipe is ideal for tuned D5 setups, supporting increased power, reduced exhaust back pressure and improved thermal efficiency under load.\u003c\/p\u003e\n\u003cblockquote data-end=\"1501\" data-start=\"1301\"\u003e\n\u003cp data-end=\"1501\" data-start=\"1303\"\u003e \u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch3 data-end=\"1526\" data-start=\"1503\"\u003e\u003cstrong data-end=\"1524\" data-start=\"1507\"\u003eKey Benefits:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"1591\" data-start=\"1529\"\u003e3-inch (76 mm) high-flow design for maximum exhaust gas flow\u003c\/li\u003e\n\u003cli data-end=\"1650\" data-start=\"1594\"\u003eReduces exhaust back pressure and improves turbo spool\u003c\/li\u003e\n\u003cli data-end=\"1705\" data-start=\"1653\"\u003eSupports remapped and performance-tuned D5 engines\u003c\/li\u003e\n\u003cli data-end=\"1769\" data-start=\"1708\"\u003eTIG welded with full back-purging for maximum weld strength\u003c\/li\u003e\n\u003cli data-end=\"1822\" data-start=\"1772\"\u003eCustom laser-cut stainless steel mounting flange\u003c\/li\u003e\n\u003cli data-end=\"1878\" data-start=\"1825\"\u003eMandrel-bent pipework for smooth, unrestricted flow\u003c\/li\u003e\n\u003cli data-end=\"1949\" data-start=\"1881\"\u003eIntegrated \u003cstrong data-end=\"1916\" data-start=\"1892\"\u003estainless flexi\u003c\/strong\u003e to reduce vibration and stress\u003c\/li\u003e\n\u003cli data-end=\"1999\" data-start=\"1952\"\u003eImproves throttle response and power delivery\u003c\/li\u003e\n\u003cli data-end=\"2056\" data-start=\"2002\"\u003eIdeal for track cars and off-road performance builds\u003c\/li\u003e\n\u003cli data-end=\"2126\" data-start=\"2059\"\u003eDesigned and supplied by \u003cstrong data-end=\"2126\" data-start=\"2084\"\u003eALG Performance – UK Volvo specialists\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"2131\" data-start=\"2128\"\u003e\n\u003ch2 data-end=\"2158\" data-start=\"2133\"\u003e\u003cstrong data-end=\"2156\" data-start=\"2136\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"2187\" data-start=\"2159\"\u003e\u003cstrong data-end=\"2187\" data-start=\"2159\"\u003eManual transmission only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"2220\" data-start=\"2191\"\u003eVolvo C30 D5 Manual (2006+)\u003c\/li\u003e\n\u003cli data-end=\"2256\" data-start=\"2223\"\u003eVolvo C70 Mk2 D5 Manual (2006+)\u003c\/li\u003e\n\u003cli data-end=\"2292\" data-start=\"2259\"\u003eVolvo S40 Mk2 D5 Manual (2006+)\u003c\/li\u003e\n\u003cli data-end=\"2332\" data-start=\"2295\"\u003eVolvo S60 Mk1 D5 Manual (2005–2010)\u003c\/li\u003e\n\u003cli data-end=\"2372\" data-start=\"2335\"\u003eVolvo S60 Mk2 D5 Manual (2010–2011)\u003c\/li\u003e\n\u003cli data-end=\"2408\" data-start=\"2375\"\u003eVolvo S80 Mk2 D5 Manual (2010+)\u003c\/li\u003e\n\u003cli data-end=\"2440\" data-start=\"2411\"\u003eVolvo V50 D5 Manual (2006+)\u003c\/li\u003e\n\u003cli data-end=\"2476\" data-start=\"2443\"\u003eVolvo V60 D5 Manual (2010–2015)\u003c\/li\u003e\n\u003cli data-end=\"2516\" data-start=\"2479\"\u003eVolvo V70 Mk2 D5 Manual (2005–2007)\u003c\/li\u003e\n\u003cli data-end=\"2554\" data-start=\"2519\"\u003eVolvo V70 Mk3 D5 Manual (2007–2011)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2626\" data-start=\"2556\"\u003e\u003cstrong data-end=\"2626\" data-start=\"2556\"\u003ePlease contact us if you are unsure about fitment before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"1501\" data-start=\"1303\"\u003e\u003cstrong data-end=\"1317\" data-start=\"1303\"\u003eImportant:\u003c\/strong\u003e This product is sold \u003cstrong data-end=\"1374\" data-start=\"1339\"\u003efor off-road and track use only\u003c\/strong\u003e. Removal of emissions equipment may cause MOT failure. Responsibility for fitment and legality rests solely with the customer.\u003c\/p\u003e\n\u003cp data-end=\"1501\" data-start=\"1303\"\u003eALG Performance accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited\u003cbr\u003eIt is the customers responsibility to ensure they comply with rules and laws relating to their home country. These parts will cause an Engine Management light on the dashboard and wont pass an MOT. \u003c\/p\u003e","brand":"ÄLG Performance","offers":[{"title":"D5 Downpipe","offer_id":56558944289145,"sku":null,"price":325.0,"currency_code":"GBP","in_stock":true},{"title":"D5 DPF Delete","offer_id":56558944321913,"sku":null,"price":230.0,"currency_code":"GBP","in_stock":false},{"title":"D5 Kit (Downpipe + DPF)","offer_id":56558944354681,"sku":null,"price":555.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/ALGD5DownpipeandDPF2.png?v=1768997683"},{"product_id":"hardrace-volvo-p3-adjustable-rear-toe-arms","title":"Hardrace Volvo P3 Adjustable Rear Toe Arms","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eTake proper control of the rear-wheel alignment on your Volvo P3 with the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eHardrace Adjustable Rear Toe Control Arms\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Designed for the Volvo S60, V60, XC60, V70, XC70 and S80, these uprated arms replace the original rear toe links and provide precise adjustment of rear toe-in and toe-out.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eRear toe plays a major role in straight-line stability, cornering behaviour and tyre wear. Once a Volvo has been lowered on springs or coilovers, or other rear suspension components have been changed, the factory adjustment range may no longer be sufficient to achieve the desired alignment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Hardrace adjustable toe arms provide the additional adjustment required to correctly set the rear geometry, making them particularly useful for \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003elowered, fast-road and performance-focused P3 Volvos\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUnlike more track-focused spherical-bearing arms, these use \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ehardened-rubber bushes\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. This provides improved suspension control and durability while retaining better isolation from noise and vibration, making them particularly well suited to road and fast-road builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eManufactured from \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ehigh-strength steel alloy\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, the arms are designed to provide excellent durability while keeping unnecessary weight to a minimum. A protective coated finish helps resist corrosion and harsh road conditions, making them suitable for year-round UK use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe direct bolt-on design replaces the factory rear toe arms without fabrication and the kit is supplied as a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ecomplete pair\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, covering both sides of the rear suspension.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFor Volvos running lowering springs, coilovers, adjustable camber arms or more aggressive wheel and tyre setups, these rear toe arms allow your alignment specialist to properly fine-tune the rear suspension rather than simply accepting whatever geometry remains after lowering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eA professional four-wheel alignment is essential after installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAdjustable rear toe control\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – accurately set rear toe-in or toe-out\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eDesigned for Volvo P3 chassis models\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – including S60, V60, XC60, V70, XC70 and S80\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIdeal for lowered Volvos\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – provides additional alignment adjustment after lowering\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHardened-rubber bushes\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – improved control while retaining road-friendly refinement\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHigh-strength steel construction\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – engineered for strength and long-term durability\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eImproved rear stability\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – correct toe settings help maintain predictable high-speed behaviour\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHelps prevent uneven tyre wear\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – allows rear tracking to be correctly adjusted\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eDirect bolt-on installation\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – replaces the original rear toe links without fabrication\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIdeal with adjustable camber arms\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – allows a more complete rear geometry setup\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSupplied as a pair\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – complete left and right rear toe control arm set\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eVehicle Fitment\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo P3 Platform\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo S60 II\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo V60\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo XC60 I\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2009–2017\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo V70 III\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo XC70 III\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo S80 II\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSuitable for compatible P3-platform petrol and diesel models using the applicable multi-link rear suspension arrangement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eSupplied:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e2 x Adjustable rear toe control arms\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eBush Type:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eHardened rubber\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eRecommended For:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLowered road cars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFast-road builds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoilover-equipped Volvos\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCars fitted with adjustable rear camber arms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePerformance wheel and tyre setups\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVehicles requiring additional rear toe adjustment\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Note:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e A professional four-wheel alignment must be carried out after installation. Rear toe should be measured and adjusted correctly rather than simply setting the replacement arms to the same length as the original components.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":64680308998521,"sku":"HR0014463","price":173.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/00144634.jpg?v=1790171664"},{"product_id":"hardrace-volvo-p3-adjustable-rear-camber-arms","title":"Hardrace Volvo P3 Adjustable Rear Camber Arms","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eTake control of rear-wheel alignment on your Volvo P3 with the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eHardrace Adjustable Rear Camber Arms\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Designed for the Volvo S60, V60, XC60, V70, XC70 and S80, these uprated rear arms allow the camber angle to be accurately adjusted rather than relying on the limited range available with the standard suspension.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eLowering a Volvo on performance springs or coilovers typically increases \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enegative rear camber\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. While some negative camber can benefit cornering, excessive camber reduces the tyre's usable contact patch during normal driving and can cause accelerated wear on the inner edge of the tyre.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Hardrace adjustable camber arms allow an alignment specialist to bring the rear geometry back towards factory specification or fine-tune the camber setting for a more performance-focused chassis setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eManufactured from \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eforged aluminium alloy\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, the arms combine high strength with reduced unnecessary weight. They are supplied with \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003euprated hardened-rubber bushes\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, providing more precise suspension control than soft or ageing factory bushes while retaining the refinement required for road and fast-road use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe direct-fit design replaces the original rear camber arms without fabrication, making this an ideal upgrade for lowered P3 Volvos as well as cars undergoing a complete rear suspension refresh.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFor the best overall geometry control, these camber arms work particularly well alongside \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eadjustable rear toe arms\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, allowing both camber and toe to be correctly set after lowering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eA professional four-wheel alignment is essential after installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFully adjustable rear camber\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – fine-tune rear-wheel alignment to suit your suspension setup\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIdeal for lowered Volvos\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – correct excessive negative camber introduced by lowering springs or coilovers\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHelps reduce inner tyre wear\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – allows the tyre contact patch to be optimised through correct alignment\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eForged aluminium construction\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – strong, lightweight and designed for demanding suspension loads\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHardened-rubber bushes\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – improved control with road-friendly levels of noise and vibration\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eImproved rear stability\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – maintains more consistent suspension geometry during cornering\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eDirect bolt-on fitment\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – replaces the factory rear arms without fabrication\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSuitable for road and fast-road builds\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – performance-focused without requiring spherical bearings\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIdeal with adjustable rear toe arms\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – allows comprehensive rear geometry adjustment\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSupplied as a pair\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – complete left and right rear camber arm set\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eVehicle Fitment\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo P3 Platform\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo S60 II\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo V60\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo XC60 I\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2009–2017\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo V70 III\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo XC70 III\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo S80 II\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSuitable for applicable vehicles using the corresponding Volvo P3 rear suspension arrangement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eSupplied:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e2 x Adjustable rear camber arms\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eBush Type:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eHardened rubber\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eRecommended For:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLowered Volvo P3 models\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoilover-equipped cars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePerformance lowering springs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFast-road suspension setups\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCars suffering excessive negative rear camber\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVehicles experiencing inner rear tyre wear\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilds using adjustable rear toe arms\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Note:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e A professional four-wheel alignment is required after installation. Camber and rear toe interact with each other, so both settings should be checked and correctly adjusted after fitting.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":64680342880633,"sku":"HR0030358","price":300.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/00303581.jpg?v=1790171671"},{"product_id":"hardrace-volvo-adjustable-drop-links-s60-v60-v70-v40","title":"Hardrace Volvo Adjustable Drop Links – S60 V60 V70 V40","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eCorrect anti-roll bar geometry on your lowered Volvo with the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eHardrace Adjustable Stabiliser Links\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Designed for selected Volvo S60, V60, V70, XC70, S80 and V40 models, these adjustable drop links allow the effective link length to be fine-tuned between \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e280mm and 319mm\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e to suit changes in suspension ride height.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eLowering a Volvo with performance springs or coilovers changes the relationship between the suspension and anti-roll bar. Retaining fixed-length standard drop links can place unnecessary preload into the anti-roll bar when the car is sitting at its new ride height.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAdjustable drop links allow the anti-roll bar to be correctly positioned and unnecessary preload reduced, helping the suspension and anti-roll bar work as intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eHardrace manufactures the links from \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ehigh-tensile steel\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e with tight ball joints and protective rubber boots for increased strength, rigidity and service life. The joints also use a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eself-lubricating plastic bearing design\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, providing smooth operation with a precise connection between the suspension and anti-roll bar.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFor lowered road cars, fast-road builds and Volvos running height-adjustable coilovers, these are a worthwhile supporting suspension upgrade. They are especially useful where ride height has been changed significantly from factory specification and the standard fixed-length links no longer place the anti-roll bar in its ideal position.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe kit is supplied as a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ematched pair\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e with M10 ball studs and an adjustment range of 280–319mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e280–319mm adjustable length\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – fine-tune the drop-link length to suit your suspension setup\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIdeal for lowered Volvos\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – particularly useful with coilovers and performance lowering springs\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHelps correct anti-roll bar geometry\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – allows the bar to operate correctly after ride-height changes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHelps reduce anti-roll bar preload\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – useful when setting up height-adjustable suspension\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHigh-tensile steel construction\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – designed for strength and long-term durability\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePrecision ball joints\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – provides a tight, direct connection between the suspension and anti-roll bar\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSelf-lubricating bearing design\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – promotes smooth movement and consistent operation\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eProtective rubber joint boots\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – help protect the joints from dirt and road contamination\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eM10 ball studs\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – correct specification for the listed applications\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSupplied as a pair\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – complete two-link set\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eVehicle Fitment\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo S60 II\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVolvo P3 platform\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo V60\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVolvo P3 platform\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo V70 III\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVolvo P3 platform\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo XC70 III\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVolvo P3 platform\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo S80 II\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVolvo P3 platform\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo V40\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2013–2019\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSelected compatible models\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eHardrace application data lists the above Volvo models for this adjustable stabiliser-link specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eTechnical Specification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAdjustment range: 280–319mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBall stud: M10\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConstruction: High-tensile steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 2 links per set\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eJoint type: Ball joint with self-lubricating bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable: Yes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eRecommended For:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLowered Volvos\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoilover-equipped cars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePerformance lowering springs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFast-road suspension setups\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCars with uprated anti-roll bars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVehicles requiring anti-roll bar preload correction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Note:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e The correct link length should be set with the vehicle suspension at its normal loaded ride height. Adjustable links should not simply be matched to the original links when the vehicle has been significantly lowered.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":64680372699513,"sku":"HR0030393","price":145.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/00303931.jpg?v=1790171674"},{"product_id":"hardrace-volvo-p3-25-4mm-rear-anti-roll-bar-fwd","title":"Hardrace Volvo P3 25.4mm Rear Anti-Roll Bar – FWD","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eReduce body roll and sharpen the chassis balance of your Volvo P3 with the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eHardrace 25.4mm Rear Anti-Roll Bar\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Developed for front-wheel-drive Volvo S60, V60, XC60, V70, XC70 and S80 models, this uprated rear anti-roll bar is an effective handling upgrade for fast-road and performance-focused builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe factory rear anti-roll bar is designed around everyday comfort and predictable handling. During harder cornering, however, body roll transfers load away from the inside tyres and can contribute to the understeer-biased feel found in many standard front-wheel-drive Volvos.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIncreasing rear roll stiffness helps the car remain flatter through corners and allows the rear axle to contribute more effectively to overall chassis balance. The result is a more responsive car with sharper direction changes and a more composed feel when driven quickly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eHardrace increases the rear bar diameter from the quoted \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e21mm factory specification to 25.4mm\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, providing a substantial increase in roll resistance without requiring changes to the springs or dampers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe bar uses a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003elightweight hollow internal construction\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e manufactured from high-strength steel, then heat treated to improve strength and durability. Centre locating rings help prevent unwanted lateral movement of the bar during hard cornering, while the protective finish provides additional resistance against corrosion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eDesigned as a direct replacement for the original rear anti-roll bar, the Hardrace kit integrates with the factory suspension mounting points and is supplied as a complete \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e5-piece set\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis makes it an excellent upgrade for standard-height cars as well as Volvos fitted with \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003elowering springs, coilovers, uprated dampers and performance tyres\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFor the most balanced chassis setup, the rear anti-roll bar can also be combined with uprated or adjustable drop links and other Hardrace suspension components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eImportant: This rear anti-roll bar is suitable for FWD models only. It is not suitable for AWD Volvo applications.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Features \/ Selling Points\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e25.4mm rear anti-roll bar\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – uprated from the quoted 21mm factory bar\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eReduces body roll\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – keeps the chassis flatter during cornering\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSharper handling response\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – improves the way the car reacts to steering inputs\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eImproved chassis balance\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – particularly beneficial on understeer-biased FWD Volvos\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHollow construction\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – reduces unnecessary weight while maintaining torsional rigidity\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHeat-treated steel\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – engineered for strength and long-term durability\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eCentre locating rings\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – help prevent lateral movement of the anti-roll bar\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eDirect OE-style replacement\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – fits the original suspension mounting points\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIdeal for road and fast-road builds\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – works with standard or uprated suspension\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eComplete 5-piece set\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – supplied with the components required for the anti-roll bar installation\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eVehicle Fitment\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo P3 Platform – FWD Only\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo S60 II\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront-wheel-drive models only\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo V60\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront-wheel-drive models only\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo XC60 I\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2009–2017\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront-wheel-drive models only\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo V70 III\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront-wheel-drive models only\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo XC70 III\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront-wheel-drive models only\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo S80 II\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront-wheel-drive models only\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eImportant Fitment Note\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eFWD VEHICLES ONLY.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis rear anti-roll bar is \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enot suitable for AWD models\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, even where the model and production year appear in the fitment list.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePlease confirm the vehicle drivetrain before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specification\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLocation: Rear\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBar diameter: 25.4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuoted OE bar diameter: 21mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConstruction: Hollow steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat treated: Yes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect replacement: Yes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKit quantity: 5 pieces\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDrivetrain: FWD only\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":64680413200761,"sku":"HR0030870","price":257.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/00308701.jpg?v=1790171677"},{"product_id":"hardrace-volvo-p3-25-4mm-front-anti-roll-bar","title":"Hardrace Volvo P3 25.4mm Adjustable Front Anti-Roll Bar","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eReduce body roll and sharpen front-end response with the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eHardrace 25.4mm Adjustable Front Anti-Roll Bar for Volvo P3 models\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Designed for the Volvo S60, V60, XC60, V70, XC70 and S80, this uprated front sway bar replaces the smaller factory bar with a substantially stiffer, performance-focused setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe anti-roll bar links the left and right sides of the suspension and resists body roll as the car corners. Increasing front roll stiffness helps keep the chassis flatter through faster direction changes, providing a more controlled and confidence-inspiring front end.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eHardrace increases the bar diameter from the quoted \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e20.5mm factory specification to 25.4mm\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, giving the front suspension greater resistance to roll without requiring stiffer springs or dampers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUnlike a fixed-rate replacement bar, this version features \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003etwo adjustment positions\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, allowing the effective stiffness to be altered to suit the rest of the suspension setup and the driver's preference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe bar uses a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ehollow, heat-treated high-strength steel construction\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, helping deliver increased torsional rigidity without adding unnecessary weight. It is designed as an OE-style replacement and uses the original chassis mounting locations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis makes it an excellent chassis upgrade for everything from fast-road P3 Volvos to cars running \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003elowering springs, coilovers, uprated dampers, performance tyres and rear anti-roll bar upgrades\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFor the most balanced result, front and rear anti-roll bar stiffness should be considered together. Increasing front roll stiffness can alter the balance between understeer and oversteer, so the adjustable design gives additional flexibility when fine-tuning the car.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eImportant: Not suitable for Volvo models equipped with the 8-cylinder engine.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e25.4mm front anti-roll bar\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – uprated from the quoted 20.5mm factory bar\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e2-way adjustable stiffness\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – fine-tune the front roll rate to suit your chassis setup\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eReduces body roll\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – keeps the car flatter during hard cornering\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSharper front-end response\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – improves stability and steering feel during direction changes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHollow construction\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – increased rigidity without unnecessary weight\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHeat-treated steel\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – engineered for strength and long-term durability\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eOE-style direct replacement\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – installs using the original chassis mounting locations\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIdeal for modified P3 Volvos\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – works well with coilovers, lowering springs and uprated dampers\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eUseful chassis-balancing tool\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – adjustment allows front roll stiffness to be matched to other suspension upgrades\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eComplete 5-piece kit\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – includes the front bar and associated mounting components\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eVehicle Fitment\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003eVolvo P3 Platform\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo S60 II\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo V60\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2010–2018\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo XC60 I\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2009–2017\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo V70 III\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo XC70 III\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eVolvo S80 II\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2007–2016\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eImportant Fitment Restriction\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eNot suitable for 8-cylinder \/ V8 models.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eHardrace lists the S60 II, V60, XC60 I, V70 III, XC70 III and S80 II for this bar.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specification\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePosition: Front\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHardrace diameter: 25.4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuoted OE diameter: 20.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustment: 2-position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConstruction: Hollow steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat treated: Yes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect replacement: Yes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKit quantity: 5 pieces\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eV8 compatible: No\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eHardrace specifies a 25.4mm bar, two-hole adjustment, hollow construction and a 5-piece kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eRecommended For:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFast-road P3 Volvos\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLowered vehicles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoilover-equipped cars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePerformance tyre setups\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCars fitted with uprated rear anti-roll bars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDrivers looking for reduced front body roll and greater chassis control\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Note:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Anti-roll bar replacement on these models is more involved than a simple drop-link change. Hardrace's installation guide references subframe and steering-rack-related access, so professional installation is strongly recommended.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":64684944818553,"sku":"HR0030879","price":316.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/00308791.jpg?v=1790171681"},{"product_id":"hardrace-front-lower-ball-joint-set-volvo-s60-v60-s80-v70","title":"Hardrace Front Lower Ball Joint Set – Volvo S60, V60, S80 \u0026 V70","description":"\u003cp\u003eSharpen front-end response and replace worn OE front lower ball joints with this Hardrace OE-style pair for Ford Mondeo Mk4 and related Volvo P3-platform cars (S60, V60, S80 and V70).\u003c\/p\u003e\n\u003cp\u003eThese front lower ball joints are designed as an OEM direct replacement. Hardrace positions them to give a more accurate feel through the steering versus tired original joints, with a sealed OE-style design that does not need regular greasing and is intended to run without the noise or squeaks associated with worn links.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts in place of the factory front lower ball joints as a direct OE-style fitment. It is sold as a two-piece set so both sides can be renewed together.\u003c\/p\u003e\n\u003cp\u003eBest suited to road and fast-road use where you want tighter, more consistent front-end feel without moving to an adjustable or pillow-ball geometry kit. Confirm your lower wishbone material before ordering — this set is not for aluminium-type OE wishbones, and it is not for XC70.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardrace OE-style front lower ball joints\u003c\/li\u003e\n\u003cli\u003eOEM direct replacement fitment\u003c\/li\u003e\n\u003cli\u003eDesigned for a more accurate steering feel versus worn OE joints\u003c\/li\u003e\n\u003cli\u003eRegular greasing not required\u003c\/li\u003e\n\u003cli\u003eAimed at quiet operation (no noise or squeaks from worn joints)\u003c\/li\u003e\n\u003cli\u003eTwo-piece set (pair)\u003c\/li\u003e\n\u003cli\u003eSuitable as a street \/ fast-road OE-style upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFord Mondeo Mk4 (2007–2014)\u003c\/li\u003e\n\u003cli\u003eVolvo S60 2nd generation (2010–2018)\u003c\/li\u003e\n\u003cli\u003eVolvo V60 (2010–2018)\u003c\/li\u003e\n\u003cli\u003eVolvo S80 (2007–2016)\u003c\/li\u003e\n\u003cli\u003eVolvo V70 3rd generation (2007–2016)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Restriction\u003c\/strong\u003e Not for aluminium-type OE wishbones. Not for Volvo XC70. Always verify lower control arm \/ wishbone material and model before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Hardrace\u003c\/li\u003e\n\u003cli\u003eProduct type: Front lower ball joint\u003c\/li\u003e\n\u003cli\u003eStyle: OE style\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pcs \/ set (pair)\u003c\/li\u003e\n\u003cli\u003eMounting: OEM direct replacement\u003c\/li\u003e\n\u003cli\u003eGreasing: Regular greasing not required\u003c\/li\u003e\n\u003cli\u003eAdjustability: Not stated (OE-style replacement; not listed as camber-adjustable)\u003c\/li\u003e\n\u003cli\u003eConstruction materials: Not stated on manufacturer page\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 8713\u003c\/li\u003e\n\u003cli\u003eHardrace UK listing ID: 0030938\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing worn or loose OE front lower ball joints\u003c\/li\u003e\n\u003cli\u003eDrivers wanting a more precise OE-style steering feel on Mondeo Mk4 \/ Volvo S60, V60, S80 and V70\u003c\/li\u003e\n\u003cli\u003eStreet and fast-road cars retaining steel OE-style wishbones\u003c\/li\u003e\n\u003cli\u003eCompleting a front-end refresh alongside bushes, arms or alignment work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e OE-style direct replacement. Fit as a matched pair. After installation, a full front geometry \/ alignment check is recommended. Professional installation advised if you are not experienced with ball-joint \/ lower-arm work.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":64687163769209,"sku":"HR0030938","price":65.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/0030938-1.jpg?v=1790171687"},{"product_id":"hardrace-volvo-front-reinforced-stabilizer-links-8933","title":"Hardrace Front Reinforced Drop Links – Volvo S60, V60, XC60, S80, V70 \u0026 XC70","description":"\u003cp\u003eRefresh tired front anti-roll bar end links with this Hardrace reinforced pair, specified for Volvo S60 (2nd gen), V60, XC60 (1st gen), S80, V70 and XC70. They restore a tighter connection between the stabilizer bar and the suspension so the bar can do its job with less slack and a cleaner response over bumps and mid-corner load transfer.\u003c\/p\u003e\n\u003cp\u003eHardrace builds these as precision-assembled links with a spheroid, self-lubricating plastic bearing and a close-fitting bracket joint. The result is a durable, OE-matching fit with more direct energy transfer and a sharper, more consistent feel than worn standard links. High-strength steel alloy construction supports everyday road use as well as more spirited driving.\u003c\/p\u003e\n\u003cp\u003eThe same Hardrace 8933 kit also covers a wide shared-platform group — including Ford Focus Mk2\/Mk3, Mondeo Mk4 and Kuga Mk2, Mazda 3 and 5, MINI R50–R59 generations, and Suzuki Swift (2nd gen) — so it is a practical upgrade wherever this link design is used. Supplied as a 2-piece set (left and right).\u003c\/p\u003e\n\u003cp\u003eImportant: on Ford Focus Mk2 applications, Hardrace states these are not for RS.\u003c\/p\u003e\n\u003cp\u003eIdeal if you are replacing noisy or worn OEM drop links, pairing a new front anti-roll bar, or simply wanting a more positive front-end response without changing geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardrace front reinforced stabilizer (anti-roll bar) end links\u003c\/li\u003e\n\u003cli\u003eSupplied as a 2 pcs\/set (pair)\u003c\/li\u003e\n\u003cli\u003eSpheroid, self-lubricating plastic bearing for longevity and a tight joint\u003c\/li\u003e\n\u003cli\u003eMore direct energy transfer and feel vs worn OE links\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel alloy construction\u003c\/li\u003e\n\u003cli\u003eManufactured to match OE fit for straightforward replacement\u003c\/li\u003e\n\u003cli\u003eStrong Volvo coverage: S60, V60, XC60, S80, V70 \u0026amp; XC70 (see fitment years)\u003c\/li\u003e\n\u003cli\u003eAlso fits selected Ford, Mazda, MINI and Suzuki models sharing this link design\u003c\/li\u003e\n\u003cli\u003eNon-adjustable, OE-style reinforced replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVolvo (primary)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 (2nd gen) — 2010–2018\u003c\/li\u003e\n\u003cli\u003eVolvo V60 — 2010–2018\u003c\/li\u003e\n\u003cli\u003eVolvo XC60 (1st gen) — 2009–2017\u003c\/li\u003e\n\u003cli\u003eVolvo S80 — 2007–2016\u003c\/li\u003e\n\u003cli\u003eVolvo V70 \/ XC70 (3rd gen) — 2007–2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso fits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFord Focus Mk2 — (not for RS); typical years ~2004–2011\u003c\/li\u003e\n\u003cli\u003eFord Focus Mk3 — typical years ~2011–2018\u003c\/li\u003e\n\u003cli\u003eFord Mondeo Mk4 — 2007–2014\u003c\/li\u003e\n\u003cli\u003eFord Kuga Mk2 \/ Escape Mk3 — 2012–2019\u003c\/li\u003e\n\u003cli\u003eMazda 3 (BK) — 2003–2008\u003c\/li\u003e\n\u003cli\u003eMazda 3 (BL) — 2009–2013\u003c\/li\u003e\n\u003cli\u003eMazda 5 (CR) — 2005–2010\u003c\/li\u003e\n\u003cli\u003eMazda 5 (CW) — 2011–2018\u003c\/li\u003e\n\u003cli\u003eMINI Cooper \/ related — R50\/R52\/R53 (2001–2008); R55\/R56\/R57\/R58\/R59 (2007–2017) per Hardrace UK\u003c\/li\u003e\n\u003cli\u003eSuzuki Swift (2nd gen, ZCx1 \/ ZC31) — 2004–2010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Restriction\u003c\/strong\u003e Ford Focus Mk2: not for RS (Hardrace note). Hardrace UK briefly lists “Volvo S60 (00–09)”; manufacturer mirrors list S60 2nd gen 2010–2018 only — this listing follows 2010–2018.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Hardrace\u003c\/li\u003e\n\u003cli\u003eProduct type: Front reinforced stabilizer \/ sway-bar end links\u003c\/li\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eKit contents: 2 pcs\/set (pair)\u003c\/li\u003e\n\u003cli\u003eBearing type: Spheroid, self-lubricating plastic bearing\u003c\/li\u003e\n\u003cli\u003eConstruction: High-strength steel alloys\u003c\/li\u003e\n\u003cli\u003eAdjustable: No\u003c\/li\u003e\n\u003cli\u003eFit style: OE-matching\u003c\/li\u003e\n\u003cli\u003eManufacturer part: 8933\u003c\/li\u003e\n\u003cli\u003eHardrace UK listing: 0031589\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing worn, knocking or stretched OEM front drop links\u003c\/li\u003e\n\u003cli\u003eRestoring front anti-roll bar response on Volvo S60 \/ V60 \/ XC60 \/ S80 \/ V70 \/ XC70\u003c\/li\u003e\n\u003cli\u003ePairing with a front anti-roll bar upgrade where OE-length links are required\u003c\/li\u003e\n\u003cli\u003eRoad and fast-road use wanting a firmer, more direct bar feel without geometry change\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e OE-style replacement links. Fit both sides as a pair, torque to the vehicle manufacturer’s specifications, and check related bar bushes and mounts while the job is open. If you are unsure on procedure or torque figures, have the work carried out by a competent suspension technician.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":64687910257017,"sku":"HR0031589","price":62.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/0031589-1.jpg?v=1790171689"},{"product_id":"hardrace-trailing-arm-bushes-volvo-s60-v60-xc60-s80-v70-xc70","title":"Hardrace Trailing Arm Bushes – Volvo S60, V60, XC60, S80, V70 \u0026 XC70","description":"\u003cp\u003eThese Hardrace harden-rubber trailing arm bushes replace worn or soft OEM bushes that allow excess movement under load. On Volvo S60, V60, XC60, S80, V70 and XC70 they firm up the trailing arm location, sharpening steering response and improving stability through corners without the harshness or squeak risk often associated with polyurethane.\u003c\/p\u003e\n\u003cp\u003eHardrace catalogues this kit as a lateral control arm bushing (harden rubber). Built from high-strength, anti-crack rubber, it is an OE-style direct replacement supplied as a 2-piece set. No regular greasing is required.\u003c\/p\u003e\n\u003cp\u003eAlso fits Ford Mondeo Mk4 (2007–2014) where the same bush design is used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUprated trailing arm bushes (Hardrace harden rubber)\u003c\/li\u003e\n\u003cli\u003eHigh-strength, anti-crack rubber construction\u003c\/li\u003e\n\u003cli\u003eFirmer arm location for sharper response and a more composed feel\u003c\/li\u003e\n\u003cli\u003eHelps resist side lean under higher-speed cornering loads\u003c\/li\u003e\n\u003cli\u003eReduces vibration from worn soft OEM bushes\u003c\/li\u003e\n\u003cli\u003eImproves stability under load\u003c\/li\u003e\n\u003cli\u003eOE-style direct replacement\u003c\/li\u003e\n\u003cli\u003eNo regular greasing required; designed for quiet operation\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVolvo\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS60 (2nd generation) — 2010–2018\u003c\/li\u003e\n\u003cli\u003eV60 — 2010–2018\u003c\/li\u003e\n\u003cli\u003eXC60 (1st generation) — 2009–2017\u003c\/li\u003e\n\u003cli\u003eS80 — 2007–2016\u003c\/li\u003e\n\u003cli\u003eV70 \/ XC70 (3rd generation) — 2007–2016\u003c\/li\u003e\n\u003cli\u003eV70 \/ XC70 (2nd generation) — 2000–2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso fits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFord Mondeo Mk4 — 2007–2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Restriction\u003c\/strong\u003e Confirm these are the trailing arm bushes your car needs before ordering — do not assume they replace wishbone, toe-arm, or anti-roll bar bushes.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: Hardrace\u003c\/li\u003e\n\u003cli\u003ePart number: Q0013\u003c\/li\u003e\n\u003cli\u003eHardrace UK listing SKU: 0050318\u003c\/li\u003e\n\u003cli\u003ePopular name: Trailing arm bushes\u003c\/li\u003e\n\u003cli\u003eHardrace catalogue name: Lateral control arm bushing\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened rubber\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pcs\/set\u003c\/li\u003e\n\u003cli\u003eBushing type: 4\u003c\/li\u003e\n\u003cli\u003eDimensions (mm): A 21 · B 89.6\/90.6 · C 151 · D 40\u003c\/li\u003e\n\u003cli\u003eAdjustable: No\u003c\/li\u003e\n\u003cli\u003eGreasing: Not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvos with worn or collapsed trailing arm bushes (play, vague steering, wander)\u003c\/li\u003e\n\u003cli\u003eDrivers wanting a firmer, more precise feel without switching to polyurethane\u003c\/li\u003e\n\u003cli\u003eRoad and fast-road use where OE-style fitment and quiet operation matter\u003c\/li\u003e\n\u003cli\u003eCompleting a suspension refresh alongside arms, links, or anti-roll bar work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e OE-style replacement bushes. Fitting typically requires the arm to be removed and the old bushes pressed out \/ new bushes pressed in — professional installation with suitable press tooling is recommended. Always use the vehicle manufacturer’s torque settings and check geometry after fitting.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":64687967797625,"sku":"HR0050318","price":168.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/0050318-1.jpg?v=1790171693"},{"product_id":"volvo-s80-2-4td-jetex-cat-back-exhaust-system-2c-h2","title":"Volvo S80 2.4TD Jetex Cat Back Exhaust System (2001-06)","description":"\u003cp\u003eThe Jetex cat back exhaust system for the Volvo S80 2.4TD (2001-06) is a stainless steel performance half system that replaces the factory exhaust from the original pipework back. It improves exhaust flow and gives your Volvo a deeper, sportier note while staying comfortable on the road.\u003c\/p\u003e\n\u003cp\u003eThe system is made in 63.5mm stainless steel pipework and finishes with Round 90mm tailpipes. Jetex catalogue this part as a \"Half System\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Volvo S80 2.4TD (2001-06)\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for long-lasting corrosion resistance\u003c\/li\u003e\n\u003cli\u003e63.5mm pipework\u003c\/li\u003e\n\u003cli\u003eRound 90mm tailpipes\u003c\/li\u003e\n\u003cli\u003eFitting point: Original Pipework\u003c\/li\u003e\n\u003cli\u003eJetex part number: 2C-H2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 2.4TD 131bhp (2001-06)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Jetex\u003c\/li\u003e\n\u003cli\u003ePart Number: 2C-H2\u003c\/li\u003e\n\u003cli\u003eSystem Type: Half System\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eFitting Point: Original Pipework\u003c\/li\u003e\n\u003cli\u003ePipe Diameter: 63.5mm\u003c\/li\u003e\n\u003cli\u003eTailpipe Style: Round 90mm\u003c\/li\u003e\n\u003cli\u003eManufacturer Weight: 16kg\u003c\/li\u003e\n\u003cli\u003eEC Approved: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 2.4TD owners upgrading or replacing their exhaust\u003c\/li\u003e\n\u003cli\u003eDrivers wanting a stainless steel system that lasts\u003c\/li\u003e\n\u003cli\u003eOEM-plus road builds\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Jetex","offers":[{"title":"Default Title","offer_id":64865016643961,"sku":"2C-H2","price":518.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/2c-h2-1.jpg?v=1791889313"},{"product_id":"volvo-s80-mk2-2006-2010-maxton-design-spoiler-cap-3d-vo-s80-3-cap1g","title":"Volvo S80 Mk2 (2006-2010) Maxton Design Spoiler Cap 3D","description":"\u003cp\u003eUpgrade the look of your Volvo S80 Mk2 with this Maxton Design boot spoiler extension in gloss black. Designed for the 2006-2010 S80 Mk2, it adds a lower, sharper OEM+ stance that suits both stock and lightly modified cars.\u003c\/p\u003e\n\u003cp\u003eMaxton catalogue this part as \"Spoiler CAP 3D compatible with Volvo S80 Mk2\" (Street Plus collection). It is 3D-scanned for fit and moulded in automotive-grade ABS, supplied ready to mount in gloss black with no primer or paint needed.\u003c\/p\u003e\n\u003cp\u003eThe kit includes spoiler cap 3d + 3m tape |, degreasing cloth |, fitting manual. A protective film arrives on the part; leave it on until you have confirmed fitment.\u003c\/p\u003e\n\u003cp\u003eIdeal if you want a subtle styling update that pairs with other Maxton pieces for the S80 Mk2, without committing to a full body kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxton Design boot spoiler extension for Volvo S80 Mk2 (2006-2010)\u003c\/li\u003e\n\u003cli\u003eCatalogue name: Spoiler CAP 3D (Street Plus)\u003c\/li\u003e\n\u003cli\u003eGloss Black finish, ready to fit\u003c\/li\u003e\n\u003cli\u003eSupplied with fitting kit and fitting manual\u003c\/li\u003e\n\u003cli\u003e3D-scanned for a precise OEM+ fit\u003c\/li\u003e\n\u003cli\u003eTÜV MATERIALGUTACHTEN material certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 (2006-2010)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Restriction\u003c\/strong\u003e Maxton advises comparing the vehicle in the listing photos with your own car before ordering. Removing the protective film voids returns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Maxton Design\u003c\/li\u003e\n\u003cli\u003eCollection: Street Plus\u003c\/li\u003e\n\u003cli\u003eProduct type (popular): boot spoiler extension\u003c\/li\u003e\n\u003cli\u003eCatalogue name: Spoiler CAP 3D\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS plastic\u003c\/li\u003e\n\u003cli\u003eFinish (UK SKU): Gloss Black\u003c\/li\u003e\n\u003cli\u003eContents: Spoiler CAP 3D + 3M Tape |, Degreasing Cloth |, Fitting Manual\u003c\/li\u003e\n\u003cli\u003eManufacturer code: VO-S80-3-CAP1G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 owners wanting an OEM+ styling upgrade\u003c\/li\u003e\n\u003cli\u003eMatching Maxton front, side and rear pieces on the same model\u003c\/li\u003e\n\u003cli\u003eDrivers wanting ready-to-mount gloss black without paintwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e Maxton supplies a fitting kit and manual. Professional installation is recommended unless you are confident following the Maxton fitting guide.\u003c\/p\u003e\n","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":64865525137785,"sku":"VO-S80-3-CAP1G","price":165.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/20231102221355_65441f2366997-1000x750.jpg?v=1791892197"},{"product_id":"volvo-s80-mk2-2006-2010-maxton-design-front-splitter-vo-s80-3-fd1g","title":"Volvo S80 Mk2 (2006-2010) Maxton Design Front Splitter","description":"\u003cp\u003eUpgrade the look of your Volvo S80 Mk2 with this Maxton Design front splitter in gloss black. Designed for the 2006-2010 S80 Mk2, it adds a lower, sharper OEM+ stance that suits both stock and lightly modified cars.\u003c\/p\u003e\n\u003cp\u003eMaxton catalogue this part as \"Front Splitter compatible with Volvo S80 Mk2\" (Street Plus collection). It is 3D-scanned for fit and moulded in automotive-grade ABS, supplied ready to mount in gloss black with no primer or paint needed.\u003c\/p\u003e\n\u003cp\u003eThe kit includes front splitter |, fitting kit |, fitting manual. A protective film arrives on the part; leave it on until you have confirmed fitment.\u003c\/p\u003e\n\u003cp\u003eIdeal if you want a subtle styling update that pairs with other Maxton pieces for the S80 Mk2, without committing to a full body kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxton Design front splitter for Volvo S80 Mk2 (2006-2010)\u003c\/li\u003e\n\u003cli\u003eCatalogue name: Front Splitter (Street Plus)\u003c\/li\u003e\n\u003cli\u003eGloss Black finish, ready to fit\u003c\/li\u003e\n\u003cli\u003eSupplied with fitting kit and fitting manual\u003c\/li\u003e\n\u003cli\u003e3D-scanned for a precise OEM+ fit\u003c\/li\u003e\n\u003cli\u003eTÜV MATERIALGUTACHTEN material certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 (2006-2010)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Restriction\u003c\/strong\u003e Maxton advises comparing the vehicle in the listing photos with your own car before ordering. Removing the protective film voids returns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Maxton Design\u003c\/li\u003e\n\u003cli\u003eCollection: Street Plus\u003c\/li\u003e\n\u003cli\u003eProduct type (popular): front splitter\u003c\/li\u003e\n\u003cli\u003eCatalogue name: Front Splitter\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS plastic\u003c\/li\u003e\n\u003cli\u003eFinish (UK SKU): Gloss Black\u003c\/li\u003e\n\u003cli\u003eContents: Front Splitter |, Fitting Kit |, Fitting Manual\u003c\/li\u003e\n\u003cli\u003eManufacturer code: VO-S80-3-FD1G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 owners wanting an OEM+ styling upgrade\u003c\/li\u003e\n\u003cli\u003eMatching Maxton front, side and rear pieces on the same model\u003c\/li\u003e\n\u003cli\u003eDrivers wanting ready-to-mount gloss black without paintwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e Maxton supplies a fitting kit and manual. Professional installation is recommended unless you are confident following the Maxton fitting guide.\u003c\/p\u003e\n","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":64865525170553,"sku":"VO-S80-3-FD1G","price":240.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/20231102221007_65441e3f9bf4a-1000x750.jpg?v=1791892198"},{"product_id":"volvo-s80-mk2-2006-2010-maxton-design-central-rear-diffuser-vo-s80-3-rd1g","title":"Volvo S80 Mk2 (2006-2010) Maxton Design Central Rear Diffuser","description":"\u003cp\u003eUpgrade the look of your Volvo S80 Mk2 with this Maxton Design central rear diffuser in gloss black. Designed for the 2006-2010 S80 Mk2, it adds a lower, sharper OEM+ stance that suits both stock and lightly modified cars.\u003c\/p\u003e\n\u003cp\u003eMaxton catalogue this part as \"Central Rear Splitter compatible with Volvo S80 Mk2\" (Street Plus collection). It is 3D-scanned for fit and moulded in automotive-grade ABS, supplied ready to mount in gloss black with no primer or paint needed.\u003c\/p\u003e\n\u003cp\u003eThe kit includes rear diffuser |, fitting manual. A protective film arrives on the part; leave it on until you have confirmed fitment.\u003c\/p\u003e\n\u003cp\u003eIdeal if you want a subtle styling update that pairs with other Maxton pieces for the S80 Mk2, without committing to a full body kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxton Design central rear diffuser for Volvo S80 Mk2 (2006-2010)\u003c\/li\u003e\n\u003cli\u003eCatalogue name: Central Rear Splitter (Street Plus)\u003c\/li\u003e\n\u003cli\u003eGloss Black finish, ready to fit\u003c\/li\u003e\n\u003cli\u003eSupplied with fitting kit and fitting manual\u003c\/li\u003e\n\u003cli\u003e3D-scanned for a precise OEM+ fit\u003c\/li\u003e\n\u003cli\u003eTÜV MATERIALGUTACHTEN material certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 (2006-2010)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Restriction\u003c\/strong\u003e Maxton advises comparing the vehicle in the listing photos with your own car before ordering. Removing the protective film voids returns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Maxton Design\u003c\/li\u003e\n\u003cli\u003eCollection: Street Plus\u003c\/li\u003e\n\u003cli\u003eProduct type (popular): central rear diffuser\u003c\/li\u003e\n\u003cli\u003eCatalogue name: Central Rear Splitter\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS plastic\u003c\/li\u003e\n\u003cli\u003eFinish (UK SKU): Gloss Black\u003c\/li\u003e\n\u003cli\u003eContents: Rear Diffuser |, Fitting manual\u003c\/li\u003e\n\u003cli\u003eManufacturer code: VO-S80-3-RD1G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 owners wanting an OEM+ styling upgrade\u003c\/li\u003e\n\u003cli\u003eMatching Maxton front, side and rear pieces on the same model\u003c\/li\u003e\n\u003cli\u003eDrivers wanting ready-to-mount gloss black without paintwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e Maxton supplies a fitting kit and manual. Professional installation is recommended unless you are confident following the Maxton fitting guide.\u003c\/p\u003e\n","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":64865525268857,"sku":"VO-S80-3-RD1G","price":240.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/20231102221532_65441f8427495-1000x750.jpg?v=1791892199"},{"product_id":"volvo-s80-mk2-2006-2010-maxton-design-side-skirts-vo-s80-3-sd1g","title":"Volvo S80 Mk2 (2006-2010) Maxton Design Side Skirts","description":"\u003cp\u003eUpgrade the look of your Volvo S80 Mk2 with this Maxton Design side skirts in gloss black. Designed for the 2006-2010 S80 Mk2, it adds a lower, sharper OEM+ stance that suits both stock and lightly modified cars.\u003c\/p\u003e\n\u003cp\u003eMaxton catalogue this part as \"Side Skirts Diffusers compatible with Volvo S80 Mk2\" (Street Plus collection). It is 3D-scanned for fit and moulded in automotive-grade ABS, supplied ready to mount in gloss black with no primer or paint needed.\u003c\/p\u003e\n\u003cp\u003eThe kit includes side skirts diffusers, fitting kit, fitting manual. A protective film arrives on the part; leave it on until you have confirmed fitment.\u003c\/p\u003e\n\u003cp\u003eIdeal if you want a subtle styling update that pairs with other Maxton pieces for the S80 Mk2, without committing to a full body kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaxton Design side skirts for Volvo S80 Mk2 (2006-2010)\u003c\/li\u003e\n\u003cli\u003eCatalogue name: Side Skirts Diffusers (Street Plus)\u003c\/li\u003e\n\u003cli\u003eGloss Black finish, ready to fit\u003c\/li\u003e\n\u003cli\u003eSupplied with fitting kit and fitting manual\u003c\/li\u003e\n\u003cli\u003e3D-scanned for a precise OEM+ fit\u003c\/li\u003e\n\u003cli\u003eTÜV MATERIALGUTACHTEN material certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 (2006-2010)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Restriction\u003c\/strong\u003e Maxton advises comparing the vehicle in the listing photos with your own car before ordering. Removing the protective film voids returns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Maxton Design\u003c\/li\u003e\n\u003cli\u003eCollection: Street Plus\u003c\/li\u003e\n\u003cli\u003eProduct type (popular): side skirts\u003c\/li\u003e\n\u003cli\u003eCatalogue name: Side Skirts Diffusers\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS plastic\u003c\/li\u003e\n\u003cli\u003eFinish (UK SKU): Gloss Black\u003c\/li\u003e\n\u003cli\u003eContents: Side Skirts Diffusers, Fitting kit, Fitting manual\u003c\/li\u003e\n\u003cli\u003eManufacturer code: VO-S80-3-SD1G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 owners wanting an OEM+ styling upgrade\u003c\/li\u003e\n\u003cli\u003eMatching Maxton front, side and rear pieces on the same model\u003c\/li\u003e\n\u003cli\u003eDrivers wanting ready-to-mount gloss black without paintwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e Maxton supplies a fitting kit and manual. Professional installation is recommended unless you are confident following the Maxton fitting guide.\u003c\/p\u003e\n","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":64865525367161,"sku":"VO-S80-3-SD1G","price":240.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/20231102221149_65441ea5d5bf2-1000x750.jpg?v=1791892200"},{"product_id":"volvo-s60-mk2-v60-mk1-v70-mk3-xc70-mk2-s80-mk2-xc60-mk1-do88-turbo-pressure-pipe-kit-intercooler-charge-pipes-tr-160","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 (2008-2015) 3.0 T6 inc. Polestar DO88 Turbo Pressure Pipe Kit (Intercooler Charge Pipes)","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 with the genuine DO88 turbo pressure pipe kit (intercooler charge pipes). Built for 3.0 T6 inc. Polestar engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is for you with significant horsepower goals that want to upgrade to the absolute best!\u003c\/p\u003e\n\u003cp\u003eOur pressure pipe has considerably better airflow than the stock pipe. This has been verified in several tests, both in car and in our own SuperFlow SF-1020 flow bench.\u003c\/p\u003e\n\u003cp\u003eSignificant advantages with do88 pressure pipes (OEM pipes):\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAir flow at 0,1bar\/1,45psi pressure drop: 498CFM (436CFM), do88 14% higher! See graph image.\u003c\/li\u003e\n\u003cli\u003eDesigned to handle high pressure and temperatures!\u003c\/li\u003e\n\u003cli\u003eThe pressure pipe is manufactured in 70mm (2,75”) mandrel bent seamless aluminium pipe.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCustom made high quality silicone hose with 4 layers of polyester\/aramid reinforcement. These hose can handle very high temperature and pressure!\u003c\/p\u003e\n\u003cp\u003eAlways remember that the OEM intercooler pipes and hoses were designed for the power level the car was built for and a power increase or even very hard use of the car in a standard version may cause that the OEM pipes and hoses don’t have the performance you need. So only after engine software tuning do88 pressure pipes will give a performance increase over the OEM pipes!\u003c\/p\u003e\n\u003cp\u003edo88 pressure pipes come with all hardware necessary for installation.\u003c\/p\u003e\n\u003cp\u003eIncluded parts in this kit:\u003c\/p\u003e\n\n\u003cli\u003eAluminium pressure pipe 2pcs\u003c\/li\u003e\n\u003cli\u003eSilicone hoses 4pcs\u003c\/li\u003e\n\u003cli\u003eStandard hose clamps 8pcs\u003c\/li\u003e\n\n\u003cp\u003eSupplied with a choice of black, blue or red hoses. Please select from the drop down menu when ordering.\u003c\/p\u003e\n\u003cp\u003eEquivalent Volvo part numbers 30636611, 30636612, 31319473, 30740940, 31274160, 30741450 (\u003cem\u003efor cross reference only\u003c\/em\u003e), DO88 reference TR-160\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Turbo Pressure Pipe Kit (Intercooler Charge Pipes) for Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 (2008-2015)\u003c\/li\u003e\n\u003cli\u003eEngines: 3.0 T6 inc. Polestar\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eChoice of black, blue or red silicone hoses at no extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2011-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2009-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2008-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC60 Mk1 (2009-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Turbo Pressure Pipe Kit (Intercooler Charge Pipes)\u003c\/li\u003e\n\u003cli\u003eDO88 article code: TR-160-BLK, TR-160-BLU, TR-160-RED\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Black","offer_id":64866045886841,"sku":"TR-160-BLK","price":403.68,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":64866045919609,"sku":"TR-160-BLU","price":403.68,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":64866045952377,"sku":"TR-160-RED","price":403.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/tr-160-b_1_large_7fa2ccaf-21db-48ab-8bf8-05a78aca4946.jpg?v=1791894699"},{"product_id":"volvo-s60-mk1-v70-mk2-xc70-mk1-s80-mk1-do88-performance-intercooler-icm-160","title":"Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 (2000-2009) Petrol Turbo \u0026 D5 \/ 2.4D DO88 Performance Intercooler","description":"\u003cp\u003eUpgrade your Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 with the genuine DO88 performance intercooler. Built for Petrol Turbo \u0026amp; D5 \/ 2.4D engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTo Fit:\u003c\/em\u003e D5 and 2.4D (2.4 litre) diesel models \u003c\/p\u003e\n\n\u003cli\u003eS60 from 2001 to 2009\u003c\/li\u003e\n\u003cli\u003eV70II from 2000 to 2008\u003c\/li\u003e\n\u003cli\u003eS80 from 1999 to 2006\u003c\/li\u003e\n\u003cli\u003eXC70 2001-2007\u003c\/li\u003e\n\n\u003cp\u003eThis performance intercooler is developed by do88 to replace the original \/ OEM intercooler and gives a true performance gain without the need for rebuilding the whole car!\u003c\/p\u003e\n\u003cp\u003eThis intercooler fits all Volvo S60 \/ V70 \/ XC70 \/ S80 turbo models with or without sensor on the intercooler outlet as it has a mounting plate but also includes a block off plate that will be used only on cars without a sensor mounted on the intercooler outlet.\u003c\/p\u003e\n\u003cp\u003eSignificant advantages with do88 performance intercooler against (OEM intercooler):\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCore volume: 13068cm3 (8659cm3), do88 is 51% larger!\u003c\/li\u003e\n\u003cli\u003eAir flow at 0,15bar\/2,18psi pressure drop: 319CFM (272CFM), do88 17% higher\u003c\/li\u003e\n\u003cli\u003ePost intercooler air temperature at same conditions: 30°C (54°C), – do88 24°C lower!\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003edo88 performance intercoolers are an all aluminium construction with CAD designed, flow optimised cast end tanks and optimised core design to achieve best possible cooling efficiency combined with lowest possible pressure drop.\u003c\/p\u003e\n\u003cp\u003eThe OEM intercooler was designed for the power level the car was built with and a power increase or even very hard use of the car with a standard intercooler may mean that the OEM intercooler does not have the performance required. So after a software tune the do88 performance intercooler will give a great performance increase over the OEM intercooler.\u003c\/p\u003e\n\u003cp\u003eThe OEM intercooler has plastic tanks that often do not cope with higher boost levels very well so the do88 performance intercooler will also add reliability.\u003c\/p\u003e\n\u003cp\u003eA common misunderstanding is that an intercooler installed in this position cannot provide good performance and a front mounted intercooler \/ FMIC would be much better. But actually the do88 performance intercooler are far better than most FMIC installations where only a core with small front surface are possible to install and often also installed partially behind the bumper beam which will reduce cooling capacity even further and often cooling below the OEM intercooler are achieved.\u003c\/p\u003e\n\u003cp\u003edo88 performance intercooler installs into the original position with original fastenings. The do88 performance intercooler comes with all hardware necessary for installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eDO88 reference ICM-160, Equivalent Genuine Volvo parts number 8649471, 8671694, 8683169 (for cross reference only)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Performance Intercooler for Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 (2000-2009)\u003c\/li\u003e\n\u003cli\u003eEngines: Petrol Turbo \u0026amp; D5 \/ 2.4D\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk1 (2001-2009) – Petrol Turbo \u0026amp; D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk2 (2000-2008) – Petrol Turbo \u0026amp; D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk1 (2001-2007) – Petrol Turbo \u0026amp; D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk1 (2000-2006) – Petrol Turbo \u0026amp; D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Performance Intercooler\u003c\/li\u003e\n\u003cli\u003eDO88 article code: ICM-160\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Default Title","offer_id":64866048311673,"sku":"ICM-160","price":552.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/icm-160_1large.jpg?v=1791894725"},{"product_id":"volvo-s80-mk2-v70-mk3-xc70-mk2-do88-performance-intercooler-icm-220-v70","title":"Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 (2007-2015) Petrol \u0026 Diesel DO88 Performance Intercooler","description":"\u003cp\u003eUpgrade your Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 with the genuine DO88 performance intercooler. Built for Petrol \u0026amp; Diesel engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith the following engine types:\u003c\/p\u003e\n\n\u003cli\u003ePetrol\u003c\/li\u003e\n\u003cli\u003eT3 (with 2 litre engine only)\u003c\/li\u003e\n\u003cli\u003eT4 (with 2 litre engine only)\u003c\/li\u003e\n\u003cli\u003e2.0T 2010\u003c\/li\u003e\n\u003cli\u003eT5 2011 on (except models listed below)\u003c\/li\u003e\n\u003cli\u003eT6 2014 on  (3.0 litre)\u003c\/li\u003e\n\u003cli\u003eT6 AWD 2010 on   (3.0 litre)\u003c\/li\u003e\n\u003cli\u003e5 CYLINDER DIESEL MODELS 2.0 and 2.4 litres:\u003c\/li\u003e\n\u003cli\u003eD3 2010 on\u003c\/li\u003e\n\u003cli\u003eD4 2013 on\u003c\/li\u003e\n\u003cli\u003eD4 AWD 2013 on\u003c\/li\u003e\n\u003cli\u003eD5 2010 on\u003c\/li\u003e\n\u003cli\u003eD5 AWD 2010 on\u003c\/li\u003e\n\n\u003cp\u003e**Please note, will not fit models 07-12 with the early ‘large’ type of adaptive cruise control sensor – see last product image\u003c\/p\u003e\n\u003cp\u003eEXCEPT the following engine variants:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eB4204T11 2014-2015 (T5 245bhp)\u003c\/li\u003e\n\u003cli\u003eB4204T15 2014-2015 (T5 220 bhp)\u003c\/li\u003e\n\u003cli\u003eB4204T19 2016 (T4 190 bhp)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAll Aluminium performance intercooler for S80 and V70\/XC70 models, developed in house by DO88 and benefits from their extensive testing programme.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSignificant advantages with do88 performance intercooler (OEM intercooler)\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e– Greater core volume:13959cm3 (6532cm3), + 114 % bigger! (over twice the size of the OE part)\u003c\/li\u003e\n\u003cli\u003e– Air flow at 0,15bar\/2,18psi pressure drop:372 CFM (342 CFM), 8 % higher!\u003c\/li\u003e\n\u003cli\u003e– Lower post intercooler air temperature at same conditions: 31°C (53°C), 22°C lower than the original Volvo intercooler during testing by repeated power runs !\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis intercooler is constructed to deliver the best cooling efficiency during tough conditions. Exclusively manufactured in aluminum with continuous welds, it guarantees reliability and endurance when you really need it. The increased core volume improves cooling efficiency and lowers the intake air temperature. Naturally, this being a do88 performance product, we have executed thorough, severe and continuous tests whilst developing this product to ensure best performance. Not one compromise has been made. This intercooler is carefully optimized to the given space for an easy drop-in-fitment. The + 114 % increased core volume is an achievement DO88 are proud of. It´s a remarkable difference. As a result the engine pulls better all over the revs and withstands repeated full throttle runs without building heat.\u003c\/p\u003e\n\u003cp\u003eThe perception of an intercooler being something to upgrade only after a major engine tune is false, yet widely spread among customers and car people. During hot summer days, during repeated acceleration, inspired driving or even at ordinary driving in a hotter climate area, it doesn´t take much of an effort from the engine using the original intercooler to generate dangerously high inlet temperatures – even on a standard, non-tuned, car. The cooling capacity with an OEM-intercooler is in many cases inferior which will affect the usable power outtake. The heat has to be eliminated, or the promised output will be decreased as you start giving gas. With our DO88 performance intercooler you can rest assured the power is there, at all times.\u003c\/p\u003e\n\u003cp\u003eThis product comes with everything necessary for an easy installation, without the need  in any way changing the car´s original shape. Bolts, nuts, brackets and mounting instructions are included.\u003c\/p\u003e\n\u003cp\u003e**When installing to cars fitted with forward radar sensor, please remove the sensor, and turn the fixing bolt around to face outwards and allow clearance to the new intercooler.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure if this intercooler is suitable for your car please use the contact us tab at the bottom of the webpage to email us an enquiry and quote your car’s chassis number starting yv1 ……\u003c\/p\u003e\n\u003cp\u003ePlease note, this product has a 5-7 working day lead time before despatch\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eEquivalent Volvo part numbers 31280014, 31338473, 31338474 (for cross reference only), DO88 product reference ICM-220-V70\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Performance Intercooler for Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 (2007-2015)\u003c\/li\u003e\n\u003cli\u003eEngines: Petrol \u0026amp; Diesel\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2007-2015) – Petrol \u0026amp; Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2015) – Petrol \u0026amp; Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2008-2015) – Petrol \u0026amp; Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Performance Intercooler\u003c\/li\u003e\n\u003cli\u003eDO88 article code: ICM-220-V70\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Default Title","offer_id":64866048541049,"sku":"ICM-220-V70","price":575.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv908864_large1_f270bb9b-9e00-4e1b-9102-5c27f9e2156d.jpg?v=1791894728"},{"product_id":"volvo-s60-mk2-v60-mk1-v70-mk3-xc70-mk2-s80-mk2-v40-v40-cross-country-do88-turbo-intake-pipe-kit-ir-140","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ V40 \/ V40 Cross Country (2007-2016) T4 \/ T5 \/ 2.5T DO88 Turbo Intake Pipe Kit","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ V40 \/ V40 Cross Country with the genuine DO88 turbo intake pipe kit. Built for T4 \/ T5 \/ 2.5T engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe best Volvo V40, S60, V60, V70, S80 2007-2016 performance turbo inlet pipe kit on the market!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is for those of you that have high horsepower goal and wish to upgrade to the absolute best! Our turbo inlet pipe has better air flow than the stock pipe. This is verified by our own SuperFlow SF-1020 flow bench. The original turbo intake pipe between the air filter and turbo inlet has a internal diameter of 56mm in the tightest section. The stock pipe also has a resonator section before the turbo inlet. These are factors that restrict the air flow to the turbo. Our turbo intake pipe is 76mm (3 inch), outer diameter, all the way to eliminate all restrictions.\u003c\/p\u003e\n\u003cp\u003edo88 turbo inlet pipe has an air flow at 0,15bar\/2,18psi pressure drop 655CFM, compared to the OEM pipe that has 594CFM. The turbo inlet pipe is manufactured in 3” mandrel bent seamless aluminium pipe. Custom made high quality silicone hoses with 4 layers of polyester reinforcement and steel wire. These hoses can handle very high temperature and vacuum!\u003c\/p\u003e\n\u003cp\u003eAlways remember that the OEM turbo inlet pipe and hoses was designed for the power level the car was built for originally. A power increase, or even very hard use of the car in a standard version, may cause that the OEM pipe and hoses don’t have the performance you need. So even after engine software tune do88 pressure pipes will give a performance increase over the OEM pipes!\u003c\/p\u003e\n\u003cp\u003edo88 3″ turbo inlet pipe comes with all hardware necessary for installation.\u003c\/p\u003e\n\u003cp\u003eIncluded parts in this kit:\n1. 3″ Aluminium turbo inlet pipe\n2. Installation hardware for inlet pipe\n3. Two silicone hoses\n4. Four T-bolt hose clamps\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eEquivalent Volvo part numbers 31274655, 31338736, 31319775 (for cross reference only)\nDO88 reference IR-140\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Turbo Intake Pipe Kit for Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ V40 \/ V40 Cross Country (2007-2016)\u003c\/li\u003e\n\u003cli\u003eEngines: T4 \/ T5 \/ 2.5T\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011-2016) – T4 \/ T5 \/ 2.5T\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2014-2015) – T4 \/ T5 \/ 2.5T\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2012) – T4 \/ T5 \/ 2.5T\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2008-2012) – T4 \/ T5 \/ 2.5T\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2007-2014) – T4 \/ T5 \/ 2.5T\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V40 \/ V40 Cross Country (2013-2014) – T4 \/ T5 \/ 2.5T\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Turbo Intake Pipe Kit\u003c\/li\u003e\n\u003cli\u003eDO88 article code: IR-140\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ V40 \/ V40 Cross Country owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Default Title","offer_id":64866048672121,"sku":"IR-140","price":183.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/ir-140-b_1.webp?v=1791894730"},{"product_id":"volvo-s60-mk2-v60-mk1-v70-mk3-xc70-mk2-s80-mk2-xc60-mk1-do88-turbo-intake-pipe-kit-with-engine-cover-ir-120","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 (2008-2015) 3.0 T6 inc. Polestar DO88 Turbo Intake Pipe Kit with Engine Cover","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 with the genuine DO88 turbo intake pipe kit with engine cover. Built for 3.0 T6 inc. Polestar engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is for you that have high horsepower goals and want to upgrade to the absolute best!\u003c\/p\u003e\n\u003cp\u003eOur turbo inlet pipe has better air flow than the stock pipe. This is verified by our own SuperFlow SF-1020 flow bench. Our turbo intake pipe is 76mm (3 inch), outer diameter, all the way to eliminate all restrictions.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003edo88 turbo inlet pipe has an air flow at 0,125bar\/1,81psi pressure drop 669CFM, compared to the OEM pipe that has 594CFM.\u003c\/li\u003e\n\u003cli\u003eThe turbo inlet pipe is manufactured in 3” mandrel bent seamless aluminium pipe.\u003c\/li\u003e\n\u003cli\u003eCustom made high quality silicone hoses with 4 layers of polyester reinforcement and steel wire.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThese hoses can handle very high temperature and vacuum!\u003c\/p\u003e\n\u003cp\u003eAlways remember that the OEM turbo inlet pipe and hoses was designed for the power level the car was built for originally. A power increase, or even very hard use of the car in a standard version, may cause that the OEM pipe and hoses don’t have the performance you need. So only after engine software tuning do88 pressure pipes will give a performance increase over the OEM pipes!\u003c\/p\u003e\n\u003cp\u003eThe do88 3″ turbo inlet pipe comes with all hardware necessary for installation.\u003c\/p\u003e\n\u003cp\u003eIncluded parts in this kit: \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e3″ Aluminium turbo inlet pipe\u003c\/li\u003e\n\u003cli\u003eCarbon fiber engine cover \u003c\/li\u003e\n\u003cli\u003eInstallation hardware for inlet pipe, hoses and engine cover \u003c\/li\u003e\n\u003cli\u003eFour silicone hoses \u003c\/li\u003e\n\u003cli\u003eSix stainless steel hose clamps\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSupplied with a choice of black, blue or red hoses. Please select using the drop down menu when ordering.\u003c\/p\u003e\n\u003cp\u003eEquivalent Volvo part numbers 31338460, 30757872 (\u003cem\u003efor cross reference only)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Turbo Intake Pipe Kit with Engine Cover for Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 (2008-2015)\u003c\/li\u003e\n\u003cli\u003eEngines: 3.0 T6 inc. Polestar\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eChoice of black, blue or red silicone hoses at no extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2011-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2009-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2008-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC60 Mk1 (2009-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Turbo Intake Pipe Kit with Engine Cover\u003c\/li\u003e\n\u003cli\u003eDO88 article code: IR-120-MK-BLK, IR-120-MK-BLU, IR-120-MK-RED, IR-120-PE-BLK, IR-120-PE-BLU, IR-120-PE-RED\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Carbon Fibre \/ Black","offer_id":64866056601977,"sku":"IR-120-MK-BLK","price":663.23,"currency_code":"GBP","in_stock":true},{"title":"Carbon Fibre \/ Blue","offer_id":64866056634745,"sku":"IR-120-MK-BLU","price":663.23,"currency_code":"GBP","in_stock":true},{"title":"Carbon Fibre \/ Red","offer_id":64866056667513,"sku":"IR-120-MK-RED","price":663.23,"currency_code":"GBP","in_stock":true},{"title":"Black Plastic \/ Black","offer_id":64866056700281,"sku":"IR-120-PE-BLK","price":446.18,"currency_code":"GBP","in_stock":true},{"title":"Black Plastic \/ Blue","offer_id":64866056733049,"sku":"IR-120-PE-BLU","price":446.18,"currency_code":"GBP","in_stock":true},{"title":"Black Plastic \/ Red","offer_id":64866056765817,"sku":"IR-120-PE-RED","price":446.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/ir-120_large_13278cca-f599-4a13-a77c-464de0055d32.jpg?v=1791894775"},{"product_id":"volvo-s60-mk1-v70-mk2-s80-mk1-xc90-mk1-do88-silicone-turbo-outlet-hose-kit117-1s","title":"Volvo S60 Mk1 \/ V70 Mk2 \/ S80 Mk1 \/ XC90 Mk1 (2001-2006) D5 \/ 2.4D DO88 Silicone Turbo Outlet Hose","description":"\u003cp\u003eUpgrade your Volvo S60 Mk1 \/ V70 Mk2 \/ S80 Mk1 \/ XC90 Mk1 with the genuine DO88 silicone turbo outlet hose. Built for D5 \/ 2.4D engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlourosilicone rubber reinforced with 4 layers of fabric. Supplied in colour black\u003c\/p\u003e\n\u003cp\u003eEquivalent genuine Volvo part numbers: 30636856, 8624886 (for cross reference only) DO88 ref Kit117-1S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Turbo Outlet Hose for Volvo S60 Mk1 \/ V70 Mk2 \/ S80 Mk1 \/ XC90 Mk1 (2001-2006)\u003c\/li\u003e\n\u003cli\u003eEngines: D5 \/ 2.4D\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT117-1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk1 (2001-2005) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk2 (2001-2005) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk1 (2001-2006) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC90 Mk1 (2001-2005) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Turbo Outlet Hose\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT117-1S\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk1 \/ V70 Mk2 \/ S80 Mk1 \/ XC90 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866058240377,"sku":"KIT117-1S","price":51.83,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£3.97)","offer_id":64866058273145,"sku":"KIT117-1S+CLAMP-KIT117-1","price":55.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv908428_large_cf4183b7-b0d3-4c72-aad4-60766bb59443.jpg?v=1791894794"},{"product_id":"volvo-s60-mk1-v70-mk2-xc70-mk1-s80-mk1-xc90-mk1-do88-silicone-egr-mixer-to-inlet-manifold-hose-kit117-4s","title":"Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 (2001-2006) D5 \/ 2.4D DO88 Silicone EGR Mixer to Inlet Manifold Hose","description":"\u003cp\u003eUpgrade your Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 with the genuine DO88 silicone egr mixer to inlet manifold hose. Built for D5 \/ 2.4D engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlourosilicone rubber reinforced with 4 layers of fabric.\u003c\/p\u003e\n\u003cp\u003eSupplied in colour black\u003c\/p\u003e\n\u003cp\u003eEquivalent genuine Volvo part numbers: 8699419 (for cross reference only) DO88 ref Kit117-4S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone EGR Mixer to Inlet Manifold Hose for Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 (2001-2006)\u003c\/li\u003e\n\u003cli\u003eEngines: D5 \/ 2.4D\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT117-4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk1 (2001-2006) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk2 (2001-2006) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk1 (2001-2006) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk1 (2001-2006) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC90 Mk1 (2001-2006) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone EGR Mixer to Inlet Manifold Hose\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT117-4S\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866058502521,"sku":"KIT117-4S","price":64.54,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£3.97)","offer_id":64866058535289,"sku":"KIT117-4S+CLAMP-KIT117-4","price":68.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv908425_large_881719a2-9ead-469d-8770-5945a98cbc08.jpg?v=1791894797"},{"product_id":"volvo-s80-mk2-v70-mk3-xc70-mk2-xc60-mk1-do88-silicone-turbo-resonator-hoses-kit118-1-2s","title":"Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 \/ XC60 Mk1 (2007-2009) D5 \/ 2.4D DO88 Silicone Turbo Resonator Hoses","description":"\u003cp\u003eUpgrade your Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 \/ XC60 Mk1 with the genuine DO88 silicone turbo resonator hoses. Built for D5 \/ 2.4D engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe original rubber turbo hoses fitted by Volvo on D5 and 2.4D engines can split, causing loss of power and fault codes to be displayed.\u003c\/p\u003e\n\u003cp\u003eDo88 have therefore developed this replacement silicone hose offering improved durability and style.\u003c\/p\u003e\n\u003cp\u003eFlourosilicone rubber reinforced with 4 layers of fabric. Supplied in colour black\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEquivalent genuine Volvo part numbers: 30778733 (for cross reference only) \u003c\/em\u003e\n\u003cem\u003eDO88 ref Kit118-1-2S\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Turbo Resonator Hoses for Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 \/ XC60 Mk1 (2007-2009)\u003c\/li\u003e\n\u003cli\u003eEngines: D5 \/ 2.4D\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT118-1-2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2007-2009) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2009) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2008-2009) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC60 Mk1 (2009) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Turbo Resonator Hoses\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT118-1-2S\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 \/ XC60 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866058600825,"sku":"KIT118-1-2S","price":34.03,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£8.05)","offer_id":64866058633593,"sku":"KIT118-1-2S+CLAMP-KIT118-1-2","price":42.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv908471_large1.jpg?v=1791894798"},{"product_id":"volvo-s80-mk2-v70-mk3-xc70-mk2-xc60-mk1-do88-silicone-intercooler-inlet-hose-kit118-3s","title":"Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 \/ XC60 Mk1 (2007-2010) D5 \/ 2.4D DO88 Silicone Intercooler Inlet Hose","description":"\u003cp\u003eUpgrade your Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 \/ XC60 Mk1 with the genuine DO88 silicone intercooler inlet hose. Built for D5 \/ 2.4D engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe original rubber turbo hoses fitted by Volvo on D5 and 2.4D engines can split, causing loss of power and fault codes to be displayed.\u003c\/p\u003e\n\u003cp\u003eDo88 have therefore developed this replacement silicone hose offering improved durability.\u003c\/p\u003e\n\n\u003cp\u003eFlourosilicone rubber reinforced with 4 layers of fabric.\u003c\/p\u003e\n\u003cp\u003eSupplied in colour black\u003c\/p\u003e\n\u003cp\u003eEquivalent genuine Volvo part numbers: 30792300 (for cross reference only) DO88 ref Kit118-3S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Intercooler Inlet Hose for Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 \/ XC60 Mk1 (2007-2010)\u003c\/li\u003e\n\u003cli\u003eEngines: D5 \/ 2.4D\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT118-3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2007-2010) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2010) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2008-2010) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC60 Mk1 (2009-2010) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Intercooler Inlet Hose\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT118-3S\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 \/ XC60 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866058699129,"sku":"KIT118-3S","price":118.38,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£3.97)","offer_id":64866058731897,"sku":"KIT118-3S+CLAMP-KIT118-3","price":122.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv908474_large_b8552d0f-d2d2-4d8d-a7cf-645fa7e5125b.jpg?v=1791894799"},{"product_id":"volvo-s80-mk2-v70-mk3-xc70-mk2-do88-silicone-intercooler-outlet-hose-kit118-4s","title":"Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 (2007-2014) D5 \/ 2.4D \/ D3 \/ D4 DO88 Silicone Intercooler Outlet Hose","description":"\u003cp\u003eUpgrade your Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 with the genuine DO88 silicone intercooler outlet hose. Built for D5 \/ 2.4D \/ D3 \/ D4 engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe original rubber turbo hoses fitted by Volvo on diesel engines can split, causing loss of power and fault codes to be displayed.\u003c\/p\u003e\n\u003cp\u003eDo88 have therefore developed this replacement silicone hose offering improved durability.\u003c\/p\u003e\n\n\u003cp\u003eFlourosilicone rubber reinforced with 4 layers of fabric.\u003c\/p\u003e\n\u003cp\u003eSupplied in colour black\u003c\/p\u003e\n\u003cp\u003eEquivalent genuine Volvo part numbers: 30792545 (for cross reference only) DO88 ref Kit118-4S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Intercooler Outlet Hose for Volvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 (2007-2014)\u003c\/li\u003e\n\u003cli\u003eEngines: D5 \/ 2.4D \/ D3 \/ D4\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT118-4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2007-2014) – D5 \/ 2.4D \/ D3 \/ D4\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2014) – D5 \/ 2.4D \/ D3 \/ D4\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2008-2014) – D5 \/ 2.4D \/ D3 \/ D4\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Intercooler Outlet Hose\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT118-4S\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 \/ V70 Mk3 \/ XC70 Mk2 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866058994041,"sku":"KIT118-4S","price":149.46,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£3.97)","offer_id":64866059026809,"sku":"KIT118-4S+CLAMP-KIT118-4","price":153.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv908477_large_2dde5bec-38a5-4585-ab3d-616e9fa8fcb3.jpg?v=1791894800"},{"product_id":"volvo-s60-mk2-v60-mk1-xc60-mk1-v70-mk3-xc70-mk2-s80-mk2-do88-silicone-turbo-outlet-hose-awd-kit119-1s","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ XC60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 (2009-2013) 2.4 Diesel AWD DO88 Silicone Turbo Outlet Hose (AWD)","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ XC60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 with the genuine DO88 silicone turbo outlet hose (awd). Built for 2.4 Diesel AWD engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eD5 205bhp D5244T10\u003c\/li\u003e\n\u003cli\u003eD5 215bhp D5244T11 or T15\u003c\/li\u003e\n\u003cli\u003eD4 181bhp D5244T12\u003c\/li\u003e\n\u003cli\u003eD4 163bhp D5244T17\u003c\/li\u003e\n\u003cli\u003eD6 Hybrid 215\/280BHP D82PHEV\u003c\/li\u003e\n\u003c\/ol\u003e\n\nIf in any doubt please email us quoting the full 17 digit chassis or VIN number and we will confirm suitability for you. This will begin with YV1……..\n \n \n \nThe original rubber turbo hoses fitted by Volvo on D5 and 2.4D engines can split, causing loss of power and fault codes to be displayed.\n \nDo88 have therefore developed this replacement silicone hose offering improved durability.\n \n*If the vehicle has previously had a replacement under engine plastic boost pipe from Volvo, then this hose will not fit due to a change of design in the pipe.\n \nFlourosilicone rubber reinforced with 4 layers of fabric.\nSupplied in colour black\n \nPlease note, leadtime before despatch 4-5 working days  \n \nEquivalent genuine Volvo part numbers: 31274235 (for cross reference only) DO88 ref Kit119-1S\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Turbo Outlet Hose (AWD) for Volvo S60 Mk2 \/ V60 Mk1 \/ XC60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 (2009-2013)\u003c\/li\u003e\n\u003cli\u003eEngines: 2.4 Diesel AWD\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT119-1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011-2013) – 2.4 Diesel AWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2011-2013) – 2.4 Diesel AWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC60 Mk1 (2010-2013) – 2.4 Diesel AWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2009-2013) – 2.4 Diesel AWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2009-2013) – 2.4 Diesel AWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2009-2013) – 2.4 Diesel AWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Turbo Outlet Hose (AWD)\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT119-1S\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ XC60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866059387257,"sku":"KIT119-1S","price":67.84,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£3.97)","offer_id":64866059420025,"sku":"KIT119-1S+CLAMP-KIT119-1","price":71.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv908730_large_21a26429-c8d5-43c7-8ccf-d0bb5c81cb39.jpg?v=1791894807"},{"product_id":"volvo-s60-mk2-v60-mk1-v70-mk3-s80-mk2-do88-silicone-turbo-outlet-hose-fwd-kit119-2s","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ S80 Mk2 (2009-2015) 2.4 Diesel FWD DO88 Silicone Turbo Outlet Hose (FWD)","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ S80 Mk2 with the genuine DO88 silicone turbo outlet hose (fwd). Built for 2.4 Diesel FWD engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf in any doubt please email us quoting the full 17 digit chassis or VIN number and we will confirm suitability for you. This will begin with YV1……..\u003c\/p\u003e\n\u003cp\u003eThe original rubber turbo hoses fitted by Volvo on D5 and 2.4D engines can split, causing loss of power and fault codes to be displayed. Do88 have therefore developed this replacement silicone hose offering improved durability.\u003c\/p\u003e\n\u003cp\u003eFlourosilicone rubber reinforced with 4 layers of fabric. Supplied in colour black.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEquivalent genuine Volvo part numbers: 31261350  (for cross reference only) DO88 ref Kit119-2S\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Turbo Outlet Hose (FWD) for Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ S80 Mk2 (2009-2015)\u003c\/li\u003e\n\u003cli\u003eEngines: 2.4 Diesel FWD\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT119-2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011-2015) – 2.4 Diesel FWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2011-2015) – 2.4 Diesel FWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2009-2015) – 2.4 Diesel FWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2009-2015) – 2.4 Diesel FWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Turbo Outlet Hose (FWD)\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT119-2S\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ S80 Mk2 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866059714937,"sku":"KIT119-2S","price":59.32,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£3.97)","offer_id":64866059747705,"sku":"KIT119-2S+CLAMP-KIT119-2","price":63.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv908730_large_61450abf-5a33-4221-836e-5684626b09fc.jpg?v=1791894809"},{"product_id":"volvo-s60-mk2-v60-mk1-xc60-mk1-v70-mk3-xc70-mk2-s80-mk2-do88-silicone-intercooler-inlet-hose-kit119-3s","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ XC60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 (2009 on) 2.4 Diesel DO88 Silicone Intercooler Inlet Hose","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ XC60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 with the genuine DO88 silicone intercooler inlet hose. Built for 2.4 Diesel engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you are in any doubt regarding correct fitment please email us prior to ordering quoting your car's full chassis number starting with yv1…… \u003c\/p\u003e\n\u003cp\u003eThe original rubber turbo hoses fitted by Volvo on diesel engines can split, causing loss of power and fault codes to be displayed. Do88 have therefore developed this replacement silicone hose offering improved durability.\u003c\/p\u003e\n\u003cp\u003eFlourosilicone rubber reinforced with 4 layers of fabric.\u003c\/p\u003e\n\u003cp\u003eSupplied in colour black\u003c\/p\u003e\n\u003cp\u003eEquivalent genuine Volvo part numbers: 31370705, 31338092, 31293511 (for cross reference only) DO88 ref kit119-3s\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Intercooler Inlet Hose for Volvo S60 Mk2 \/ V60 Mk1 \/ XC60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 (2009 onwards)\u003c\/li\u003e\n\u003cli\u003eEngines: 2.4 Diesel\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT119-3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011 onwards) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2011 onwards) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC60 Mk1 (2010-2014) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2009-2016) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2009-2016) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2009-2016) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Intercooler Inlet Hose\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT119-3S\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ XC60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866059813241,"sku":"KIT119-3S","price":113.39,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£3.97)","offer_id":64866059846009,"sku":"KIT119-3S+CLAMP-KIT119-3","price":117.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv909219_large_d0abb5ec-da08-4d3e-bef3-3c0c265ff4c0.jpg?v=1791894810"},{"product_id":"volvo-v70-mk3-xc70-mk2-s80-mk2-do88-silicone-intercooler-outlet-hose-kit119-4s","title":"Volvo V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 (2009-2013) 2.4 Diesel DO88 Silicone Intercooler Outlet Hose","description":"\u003cp\u003eUpgrade your Volvo V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 with the genuine DO88 silicone intercooler outlet hose. Built for 2.4 Diesel engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTo fit:\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cli\u003eVolvo V70 III\u003c\/li\u003e\n\n\u003cp\u003eModel years: 2009-2013\nEngine: D5 205hp D5244T10\nD5 215hp D5244T11 \/ D5244T15\nD4 181hp D5244T12\nD4 163hp D5244T17\u003c\/p\u003e\n\n\u003cli\u003eVolvo XC70 II\u003c\/li\u003e\n\n\u003cp\u003eModel years: 2010-2013\nEngine: D5 205hp D5244T10\n2.4D 163hp D5244T16\nD5 215hp D5244T11 \/ D5244T15\nD4 181hp D5244T12\nD3 163hp D5244T17\u003c\/p\u003e\n\n\u003cli\u003eVolvo S80 II\u003c\/li\u003e\n\n\u003cp\u003eModel years: 2009-2013\nEngine: D5 205hp D5244T10\nD5 215hp D5244T11 \/ D5244T15\u003c\/p\u003e\n\u003cp\u003eIn this kit do88 have added an inner layer of top quality fluorosilicone rubber to extend the chemical resistance of the hose and make it last even longer time.\u003c\/p\u003e\n\u003cp\u003e \u003cem\u003eEquivalent Volvo part numbers 31370210, 30792883 (for cross reference only)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Intercooler Outlet Hose for Volvo V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 (2009-2013)\u003c\/li\u003e\n\u003cli\u003eEngines: 2.4 Diesel\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT119-4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2009-2013) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2009-2013) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2009-2013) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Intercooler Outlet Hose\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT119-4S\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866059878777,"sku":"KIT119-4S","price":101.74,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£3.97)","offer_id":64866059911545,"sku":"KIT119-4S+CLAMP-KIT119-4","price":105.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/do88-kit119-4S_large_a59bcc4b-660f-4ee1-b669-4edf5caf20f4.jpg?v=1791894811"},{"product_id":"volvo-v70-mk3-xc70-mk2-s80-mk2-do88-silicone-egr-inlet-hose-kit119-5s","title":"Volvo V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 (2009-2013) 2.4 Diesel DO88 Silicone EGR Inlet Hose","description":"\u003cp\u003eUpgrade your Volvo V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 with the genuine DO88 silicone egr inlet hose. Built for 2.4 Diesel engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTo fit:\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cli\u003eVolvo V70 III\u003c\/li\u003e\n\n\u003cp\u003eModel years: 2009-2013\nEngine: D5 205hp D5244T10\nD5 215hp D5244T11 \/ D5244T15\nD4 181hp D5244T12\nD4 163hp D5244T17\u003c\/p\u003e\n\n\u003cli\u003eVolvo XC70 II\u003c\/li\u003e\n\n\u003cp\u003eModel years: 2010-2013\nEngine: D5 205hp D5244T10\n2.4D 163hp D5244T16\nD5 215hp D5244T11 \/ D5244T15\nD4 181hp D5244T12\nD3 163hp D5244T17\u003c\/p\u003e\n\n\u003cli\u003eVolvo S80 II\u003c\/li\u003e\n\n\u003cp\u003eModel years: 2009-2013\nEngine: D5 205hp D5244T10\nD5 215hp D5244T11 \/ D5244T15\u003c\/p\u003e\n\u003cp\u003eIn this kit do88 have added an inner layer of top quality flurosilicone rubber to extend the chemical resistance of the hose and make it last even longer time.\u003c\/p\u003e\n\u003cp\u003e \u003cem\u003eEquivalent Volvo part numbers 31370208, 30792885 (for cross reference only)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone EGR Inlet Hose for Volvo V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 (2009-2013)\u003c\/li\u003e\n\u003cli\u003eEngines: 2.4 Diesel\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT119-5)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2009-2013) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2009-2013) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2009-2013) – 2.4 Diesel\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone EGR Inlet Hose\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT119-5S\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866059944313,"sku":"KIT119-5S","price":75.88,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£3.97)","offer_id":64866059977081,"sku":"KIT119-5S+CLAMP-KIT119-5","price":79.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/kit119-5s_large_094f6394-28f1-4bcd-b149-4a7b43a31036.jpg?v=1791894812"},{"product_id":"volvo-s60-mk1-v70-mk2-xc70-mk1-s80-mk1-xc90-mk1-do88-silicone-fresh-air-turbo-inlet-hose-kit120","title":"Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 (2001-2009) D5 \/ 2.4D DO88 Silicone Fresh Air Turbo Inlet Hose","description":"\u003cp\u003eUpgrade your Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 with the genuine DO88 silicone fresh air turbo inlet hose. Built for D5 \/ 2.4D engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlourosilicone rubber reinforced with 4 layers of fabric for increased durability over the original Volvo part which can easily split especially in warmer climates.\u003c\/p\u003e\n\u003cp\u003eSupplied in colour black\u003c\/p\u003e\n\u003cp\u003eEquivalent genuine Volvo part numbers: 30636854 (for cross reference only)  DO88 ref Kit120\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Fresh Air Turbo Inlet Hose for Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 (2001-2009)\u003c\/li\u003e\n\u003cli\u003eEngines: D5 \/ 2.4D\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT120)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk1 (2001-2009) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk2 (2001-2008) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk1 (2001-2006) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk1 (2001-2006) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC90 Mk1 (2001-2006) – D5 \/ 2.4D\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Fresh Air Turbo Inlet Hose\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT120\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866060206457,"sku":"KIT120","price":114.12,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£5.96)","offer_id":64866060239225,"sku":"KIT120+CLAMP-KIT120","price":120.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv905822_large_ef4485ed-4db5-4ea7-9647-1ee65234d096.jpg?v=1791894814"},{"product_id":"volvo-s60-mk2-v60-mk1-v70-mk3-xc60-mk1-s80-mk2-do88-silicone-turbo-pressure-hose-kit-kit154","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC60 Mk1 \/ S80 Mk2 (2010-2014) 2.0T \/ T5 (4-cyl) DO88 Silicone Turbo Pressure Hose Kit","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC60 Mk1 \/ S80 Mk2 with the genuine DO88 silicone turbo pressure hose kit. Built for 2.0T \/ T5 (4-cyl) engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA hose kit developed by do88 to replace OEM intercooler\/ turbo system hoses.\u003c\/p\u003e\n\u003cp\u003eThis is an stronger alternative to OEM hoses! DO88 hoses have 4 PLY reinforcement compared to OEM hoses that mostly have 1 PLY reinforcement. Another advantage of our hoses are the silicone material that withstands high temperatures for long time. The original hoses are known to be prone to failure after driving for extended periods at higher under bonnet temperatures they can go soft and burst.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eHoses included: – Hose Turbo outlet, OEM reference: 31319502\u003c\/li\u003e\n\u003cli\u003e– Hose intercooler inlet OEM reference: 31319430\u003c\/li\u003e\n\u003cli\u003eHose intercooler outlet to Throttle body OEM reference: 31319433\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf in any doubt please email us quoting the full 17 digit chassis or VIN number and we will confirm suitability for you. This will begin with YV1……..\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEquivalent Volvo part numbers 31319502, 31319430, 31319433. Do88 ref kit154S, Kit154R, Kit154B\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Turbo Pressure Hose Kit for Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC60 Mk1 \/ S80 Mk2 (2010-2014)\u003c\/li\u003e\n\u003cli\u003eEngines: 2.0T \/ T5 (4-cyl)\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT154)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011-2013) – 2.0T \/ T5 (4-cyl)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2011-2013) – 2.0T \/ T5 (4-cyl)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2010-2014) – 2.0T \/ T5 (4-cyl)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC60 Mk1 (2010-2014) – 2.0T \/ T5 (4-cyl)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2010-2014) – 2.0T \/ T5 (4-cyl)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Turbo Pressure Hose Kit\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT154\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC60 Mk1 \/ S80 Mk2 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866060304761,"sku":"KIT154","price":221.65,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£12.55)","offer_id":64866060337529,"sku":"KIT154+CLAMP-KIT154","price":234.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv909009_large1jpg.jpg?v=1791894816"},{"product_id":"volvo-s60-mk2-v60-mk1-v70-mk3-xc70-mk2-s80-mk2-xc60-mk1-do88-silicone-turbo-pressure-hose-kit-kit155","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 (2008-2016) 3.0 T6 inc. Polestar DO88 Silicone Turbo Pressure Hose Kit","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 with the genuine DO88 silicone turbo pressure hose kit. Built for 3.0 T6 inc. Polestar engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA hose kit developed by do88 to replace OEM intercooler\/ turbo system hoses.\u003c\/p\u003e\n\u003cp\u003eThis is an stronger alternative to OEM hoses! DO88 hoses have 4 PLY Nomex polyester reinforcement compared to OEM hoses that mostly have 1 PLY reinforcement. Another advantage of our hoses are the silicone material that withstands high temperatures for long time. The original hoses are known to be prone to failure after driving for extended periods at higher under bonnet temperatures they can go soft and burst.\u003c\/p\u003e\n\u003cp\u003eHoses included:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eHose turbo outlet OEM ref: 30636611\u003c\/li\u003e\n\u003cli\u003eHose intercooler outlet OEM ref: 30740940, 30741448\u003c\/li\u003e\n\u003cli\u003eHose intercooler inlet OEM ref: 31319473\u003c\/li\u003e\n\u003cli\u003eThrottle body hose OEM ref: 30741450\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf in any doubt please email us quoting the full 17 digit chassis or VIN number and we will confirm suitability for you. This will begin with YV1……..\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEquivalent Volvo part numbers 30636611, 30740940, 30741448, 31319473, 30741450 – Do88 ref kit155S, Kit155R, Kit155B\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Turbo Pressure Hose Kit for Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 (2008-2016)\u003c\/li\u003e\n\u003cli\u003eEngines: 3.0 T6 inc. Polestar\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT155)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011-2016) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2011-2016) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2008-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2008-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC60 Mk1 (2009-2015) – 3.0 T6 inc. Polestar\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Turbo Pressure Hose Kit\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT155\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866061451641,"sku":"KIT155","price":229.96,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£16.74)","offer_id":64866061484409,"sku":"KIT155+CLAMP-KIT155","price":246.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv909030_large1.jpg?v=1791894818"},{"product_id":"volvo-s60-mk1-v70-mk2-xc70-mk1-s80-mk1-do88-silicone-power-steering-suction-hose-kit182","title":"Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 (2000-2005) 5-cyl Petrol \u0026 D5 DO88 Silicone Power Steering Suction Hose","description":"\u003cp\u003eUpgrade your Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 with the genuine DO88 silicone power steering suction hose. Built for 5-cyl Petrol \u0026amp; D5 engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHigh quality silicone replacemnt hose with 3 layers of reinforcement. Withstands higher temperatures and longer lasting than the original rubber hose.\u003c\/p\u003e\n\u003cp\u003eEquivalent Volvo part number 30645081 (for cross reference only)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Power Steering Suction Hose for Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 (2000-2005)\u003c\/li\u003e\n\u003cli\u003eEngines: 5-cyl Petrol \u0026amp; D5\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT182)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk1 (2001-2005) – 5-cyl Petrol \u0026amp; D5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk2 (2000-2005) – 5-cyl Petrol \u0026amp; D5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk1 (2000-2005) – 5-cyl Petrol \u0026amp; D5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk1 (2000-2005) – 5-cyl Petrol \u0026amp; D5\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Power Steering Suction Hose\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT182\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Not included","offer_id":64866062238073,"sku":"KIT182","price":47.39,"currency_code":"GBP","in_stock":true},{"title":"Stainless clamp kit (+£3.43)","offer_id":64866062270841,"sku":"KIT182+CLAMP-KIT182","price":50.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/do88-kit182_large_7636bf8d-f53c-4539-a3dc-ff8b9cd3e243.jpg?v=1791894826"},{"product_id":"volvo-s60-mk2-v60-mk1-v70-mk3-s80-mk2-xc60-mk1-do88-silicone-coolant-hose-kit-automatic-kit198","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ S80 Mk2 \/ XC60 Mk1 (2007-2016) 5-cyl Petrol Automatic DO88 Silicone Coolant Hose Kit (Automatic)","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ S80 Mk2 \/ XC60 Mk1 with the genuine DO88 silicone coolant hose kit (automatic). Built for 5-cyl Petrol Automatic engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTo Fit: \u003c\/em\u003eCars with Automatic gearbox\u003c\/p\u003e\n\n\u003cli\u003eVolvo S80II 2007-2012, Engine Types B5254T6, T8 or B5254T10, T11, T12 – with automatic transmission only\u003c\/li\u003e\n\u003cli\u003e5 cylinder engines\u003c\/li\u003e\n\n\n\u003cp\u003eA performance silicone hose kit developed by do88 to replace OEM radiator\/cooling system hoses!\u003c\/p\u003e\n\u003cp\u003eThese hoses are entirely manufactured in high quality silicone for best finish and durability. With three to five layers of armory, depending of the inner diameter, the hoses withstand high pressure rates and high temperatures for a long time.\nThe original hoses are manufactured in rubber that often cracks from age. This is a durable solution for you that in addition improves the looks!\u003c\/p\u003e\n\u003cp\u003eNote: You must reuse the original hose connections. The original hose clamps need to be cut with a hacksaw (easy). The hose connection is mounted on the silicone hose with a regular hose clamp. Therefore, we recommend to purchase the matching clamp kit with this product.\u003c\/p\u003e\n\u003cp\u003eIncluded hoses:\u003c\/p\u003e\n\n\u003cli\u003eLower radiator hose OE Reference: 30794641\u003c\/li\u003e\n\u003cli\u003eUpper radiator hose OE Reference: 31319754\u003c\/li\u003e\n\u003cli\u003eExpansion tank hose OE Reference: 31261523\u003c\/li\u003e\n\u003cli\u003eHeater hose OE Reference: 30794859\u003c\/li\u003e\n\u003cli\u003eHeater hose OE Reference: 30636594\u003c\/li\u003e\n\u003cli\u003eOil cooler hose OE Reference: 31439474\u003c\/li\u003e\n\u003cli\u003eOil cooler hose OE Reference: 31439473\u003c\/li\u003e\n\u003cli\u003eTurbocharger coolant hose OE Reference: 31439471\u003c\/li\u003e\n\u003cli\u003eTurbocharger coolant hose OE Reference: 31439472\u003c\/li\u003e\n\u003cli\u003eTransmission cooler hose OE Reference: 31261649\u003c\/li\u003e\n\n\u003cp\u003eAvailable in a choice of colours, black blue or red. Please select from the drop down menu when ordering.\u003c\/p\u003e\n\u003cp\u003e\nEquivalent OE part numbers quoted are for cross reference only. DO88 ref kit-198\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Coolant Hose Kit (Automatic) for Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ S80 Mk2 \/ XC60 Mk1 (2007-2016)\u003c\/li\u003e\n\u003cli\u003eEngines: 5-cyl Petrol Automatic\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eChoice of black, blue or red silicone hoses at no extra cost\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT198)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011-2016) – 5-cyl Petrol Automatic\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2014-2016) – 5-cyl Petrol Automatic\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2015) – 5-cyl Petrol Automatic\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2007-2012) – 5-cyl Petrol Automatic\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC60 Mk1 (2015-2016) – 5-cyl Petrol Automatic\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Coolant Hose Kit (Automatic)\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT198-BLK, KIT198-BLU, KIT198-RED\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ S80 Mk2 \/ XC60 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Black \/ Not included","offer_id":64866062401913,"sku":"KIT198-BLK","price":204.0,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Stainless clamp kit (+£39.34)","offer_id":64866062434681,"sku":"KIT198-BLK+CLAMP-KIT198","price":243.34,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Not included","offer_id":64866062467449,"sku":"KIT198-BLU","price":204.0,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Stainless clamp kit (+£39.34)","offer_id":64866062500217,"sku":"KIT198-BLU+CLAMP-KIT198","price":243.34,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Not included","offer_id":64866062532985,"sku":"KIT198-RED","price":204.0,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Stainless clamp kit (+£39.34)","offer_id":64866062565753,"sku":"KIT198-RED+CLAMP-KIT198","price":243.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/do88-kit198_large1.jpg?v=1791894827"},{"product_id":"volvo-v70-mk3-s80-mk2-do88-silicone-coolant-hose-kit-manual-kit199","title":"Volvo V70 Mk3 \/ S80 Mk2 (2007-2015) 5-cyl Petrol Manual DO88 Silicone Coolant Hose Kit (Manual)","description":"\u003cp\u003eUpgrade your Volvo V70 Mk3 \/ S80 Mk2 with the genuine DO88 silicone coolant hose kit (manual). Built for 5-cyl Petrol Manual engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTo Fit: \u003c\/em\u003eCars with Manual gearbox\u003c\/p\u003e\n\n\u003cli\u003eVolvo V70III 2008-2012, Engine Types B5254T6, T8, B5254T10, T11 – with manual transmission only\u003c\/li\u003e\n\u003cli\u003e2013-2015 T5 B5204T9 – Manual only\u003c\/li\u003e\n\u003cli\u003e5 cylinder engines\u003c\/li\u003e\n\n\u003cp\u003e\u003cstrong\u003eA performance silicone hose kit developed by do88 to replace OEM radiator\/cooling system hoses!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese hoses are entirely manufactured in high quality silicone for best finish and durability. With three to five layers of armory, depending of the inner diameter, the hoses withstand high pressure rates and high temperatures for a long time.\nThe original hoses are manufactured in rubber that often cracks from age. This is a durable solution for you that in addition improves the looks!\u003c\/p\u003e\n\u003cp\u003eNote: You must reuse the original hose connections. The original hose clamps need to be cut with a hacksaw (easy). The hose connection is mounted on the silicone hose with a regular hose clamp. Therefore, we recommend to purchase the matching clamp kit with this product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hoses:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eLower radiator hose OE Reference: 30636592\u003c\/li\u003e\n\u003cli\u003eUpper radiator hose OE Reference: 31319754\u003c\/li\u003e\n\u003cli\u003eExpansion tank hose OE Reference: 31261523\u003c\/li\u003e\n\u003cli\u003eHeater hose OE Reference: 30794859\u003c\/li\u003e\n\u003cli\u003eHeater hose OE Reference: 30636594\u003c\/li\u003e\n\u003cli\u003eOil cooler hose OE Reference: 31439474\u003c\/li\u003e\n\u003cli\u003eOil cooler hose OE Reference: 31439473\u003c\/li\u003e\n\u003cli\u003eTurbocharger coolant hose OE Reference: 31439471\u003c\/li\u003e\n\u003cli\u003eTurbocharger coolant hose OE Reference: 31439472\u003c\/li\u003e\n\n\u003cp\u003eAvailable in a choice of colours, black blue or red. Please select from the drop down menu when ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEquivalent OE part numbers quoted are for cross reference only.\nDO88 ref kit-199\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Coolant Hose Kit (Manual) for Volvo V70 Mk3 \/ S80 Mk2 (2007-2015)\u003c\/li\u003e\n\u003cli\u003eEngines: 5-cyl Petrol Manual\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eChoice of black, blue or red silicone hoses at no extra cost\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT199)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2015) – 5-cyl Petrol Manual\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2007-2012) – 5-cyl Petrol Manual\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Coolant Hose Kit (Manual)\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT199-BLK, KIT199-BLU, KIT199-RED\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo V70 Mk3 \/ S80 Mk2 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Black \/ Not included","offer_id":64866062762361,"sku":"KIT199-BLK","price":199.3,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Stainless clamp kit (+£34.19)","offer_id":64866062795129,"sku":"KIT199-BLK+CLAMP-KIT199","price":233.49,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Not included","offer_id":64866062827897,"sku":"KIT199-BLU","price":199.3,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Stainless clamp kit (+£34.19)","offer_id":64866062860665,"sku":"KIT199-BLU+CLAMP-KIT199","price":233.49,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Not included","offer_id":64866062893433,"sku":"KIT199-RED","price":199.3,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Stainless clamp kit (+£34.19)","offer_id":64866062926201,"sku":"KIT199-RED+CLAMP-KIT199","price":233.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/do88-kit199_large1.jpg?v=1791894829"},{"product_id":"volvo-s60-mk1-v70-mk2-s80-mk1-xc70-mk1-do88-silicone-expansion-tank-hoses-kit49","title":"Volvo S60 Mk1 \/ V70 Mk2 \/ S80 Mk1 \/ XC70 Mk1 (2000-2008) 5-cyl Petrol DO88 Silicone Expansion Tank Hoses","description":"\u003cp\u003eUpgrade your Volvo S60 Mk1 \/ V70 Mk2 \/ S80 Mk1 \/ XC70 Mk1 with the genuine DO88 silicone expansion tank hoses. Built for 5-cyl Petrol engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes both coolant hoses connecting to expansion tank.\u003c\/p\u003e\n\u003cp\u003eAvailable in a choice of colours – Blue, Black or Red\u003c\/p\u003e\n\u003cp\u003eSilicone rubber reinforced with 3-layers polyester fabric\u003c\/p\u003e\n\u003cp\u003eEquivalent Genuine Volvo part numbers 30680923 (8623819) (9485587), 981376 (for cross reference only) DO88 ref Kit49\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Expansion Tank Hoses for Volvo S60 Mk1 \/ V70 Mk2 \/ S80 Mk1 \/ XC70 Mk1 (2000-2008)\u003c\/li\u003e\n\u003cli\u003eEngines: 5-cyl Petrol\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003cli\u003eChoice of black, blue or red silicone hoses at no extra cost\u003c\/li\u003e\n\u003cli\u003eOptional DO88 stainless steel clamp kit (CLAMP-KIT49)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk1 (2001-2008) – 5-cyl Petrol\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk2 (2001-2007) – 5-cyl Petrol\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk1 (2000-2006) – 5-cyl Petrol\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk1 (2001-2008) – 5-cyl Petrol\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Expansion Tank Hoses\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT49-BLK, KIT49-BLU, KIT49-RED\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk1 \/ V70 Mk2 \/ S80 Mk1 \/ XC70 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Black \/ Not included","offer_id":64866064662905,"sku":"KIT49-BLK","price":45.59,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Stainless clamp kit (+£6.14)","offer_id":64866064695673,"sku":"KIT49-BLK+CLAMP-KIT49","price":51.73,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Not included","offer_id":64866064728441,"sku":"KIT49-BLU","price":45.59,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Stainless clamp kit (+£6.14)","offer_id":64866064761209,"sku":"KIT49-BLU+CLAMP-KIT49","price":51.73,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Not included","offer_id":64866064793977,"sku":"KIT49-RED","price":45.59,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Stainless clamp kit (+£6.14)","offer_id":64866064826745,"sku":"KIT49-RED+CLAMP-KIT49","price":51.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/PFV908173_LARGE_ab9f6462-79c8-42be-8fe2-77dc5d5101de.jpg?v=1791894843"},{"product_id":"volvo-s60-mk1-v70-mk2-xc70-mk1-s80-mk1-xc90-mk1-do88-silicone-air-filter-to-turbo-inlet-hose-kit73","title":"Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 (2001-2009) 2.4T \/ 2.5T \/ T5 DO88 Silicone Air Filter to Turbo Inlet Hose","description":"\u003cp\u003eUpgrade your Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 with the genuine DO88 silicone air filter to turbo inlet hose. Built for 2.4T \/ 2.5T \/ T5 engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTo Fit\u003c\/em\u003e:  2.4T, 2.5T and 2.3 T5 Engines.\u003c\/p\u003e\n\n\u003cli\u003eS60 2.4T and T5 2001-2004, 2.5T 2003-2009\u003c\/li\u003e\n\u003cli\u003eS80 2.5T 2004-2006\u003c\/li\u003e\n\u003cli\u003eV70II inc XC70 2.4T 2001-2003 , 2.5T 2004-2008\u003c\/li\u003e\n\u003cli\u003eXC90 2.5T 2003-2007\u003c\/li\u003e\n\n\u003cp\u003eThe Hose inside diameter is 76mm (3″) – much larger than the original for increased airflow. 80mm connection to the MAF (original)\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDeveloped for a 70mm connection onto turbo\u003c\/li\u003e\n\u003cli\u003eSocket for BOV recirculation (25mm) is located on the hose underside. This is for those who do not use the original by-pass valve in the turbocharger. A plug is included if this is outlet not used.\u003c\/li\u003e\n\u003cli\u003eReinforced with steel wire so it won’t collapse during high vacuum\u003c\/li\u003e\n\u003cli\u003eIncludes replacement hose clips\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note that the hose is designed for a 70mm turbo connection. This hose can be installed together with the OEM turbo with 60mm connection, the hose clamp just needs to be tightened enough to fit the 60mm connection (this is safe and will not leak!).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEquivalent Volvo part number 30680446 (for cross reference only)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Silicone Air Filter to Turbo Inlet Hose for Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 (2001-2009)\u003c\/li\u003e\n\u003cli\u003eEngines: 2.4T \/ 2.5T \/ T5\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003cli\u003eMulti-layer reinforced silicone for high temperature and pressure resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk1 (2001-2009) – 2.4T \/ 2.5T \/ T5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk2 (2001-2008) – 2.4T \/ 2.5T \/ T5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk1 (2001-2008) – 2.4T \/ 2.5T \/ T5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk1 (2004-2006) – 2.4T \/ 2.5T \/ T5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC90 Mk1 (2003-2007) – 2.4T \/ 2.5T \/ T5\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Silicone Air Filter to Turbo Inlet Hose\u003c\/li\u003e\n\u003cli\u003eDO88 article code: KIT73\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 \/ XC90 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Default Title","offer_id":64866065252729,"sku":"KIT73","price":193.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv909002_large2.jpg?v=1791894847"},{"product_id":"volvo-s60-mk2-v60-mk1-v70-mk3-xc70-mk2-s80-mk2-do88-cold-air-intake-system-lf-130-v70","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 (2007-2016) T5 \/ 2.5T (5-cyl) DO88 Cold Air Intake System","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 with the genuine DO88 cold air intake system. Built for T5 \/ 2.5T (5-cyl) engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTo fit: \u003c\/em\u003e2.5T, 2.5FT, T5, All petrol turbo (5-cylinder)\u003c\/p\u003e\n\n\u003cli\u003eS80II 2007-2014\u003c\/li\u003e\n\u003cli\u003eV70III 2008-2014\u003c\/li\u003e\n\u003cli\u003eXC70 2008-2014\u003c\/li\u003e\n\n\u003cp\u003eThe best performance turbo air intake system for Volvo T5 Turbo 2011-2016 on the market!\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for the owners with high power goals that want to upgrade to the absolute best.\u003c\/p\u003e\n\u003cp\u003eSignificant advantages with this do88 performance intake system:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDyno verified gain of + 21hp \/ + 60Nm (Volvo V70 2.5T with Stage 1 ECU upgrade) See diagram\u003c\/li\u003e\n\u003cli\u003e24% better air flow than OEM. Verified in our own SuperFlow SF-1020 flow bench. See diagram\u003c\/li\u003e\n\u003cli\u003e9°C (16°F) lower IAT than OEM and 21°C (38°F) lower than an open filter with heat shield fitted. See diagram\u003c\/li\u003e\n\u003cli\u003eLower pressure drop and IAT, up to 3.5% lower fuel consumption.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOur intake system is designed to improve the flow \/ lower the negative pressure and at the same time only draw cold air. Many aftermarket intake systems draw hot air directly behind the fan, resulting in very high IAT and therefore loss in power \/ performance.\nSo our system is a true cold air intake.\u003c\/p\u003e\n\u003cp\u003eAlways be aware of that the OEM intake system and air filter was designed for the power level the car was built for originally. Any power increase may cause your stock intake system to not perform well enough. If your intake system doesn’t have the performance you need it will be to tough for the turbocharger to get the air it needs which will lower engine efficiency and this will make you lose hp. So even on an engine with a software tune only, the do88 intake system will give a performance increase over the OEM air box!\u003c\/p\u003e\n\u003cp\u003edo88 performance turbo air intake system comes as a complete package with all parts necessary for installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded parts in this kit:\u003c\/strong\u003e\n1. Air filter box\n2. Performance panel air filter\n3. Hoses\n4. Installation hardware\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e, \u003cem\u003efor do88 products that are not in UK stock at the time ordering, the lead time will be 7-9 days from Sweden before we can despatch your order.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVolvo original filter part number 30757155, 30677718 (for cross reference only) – note, this system uses a custom size filter\u003c\/em\u003e\n\u003cem\u003eDo88 ref LF-130-V70\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Cold Air Intake System for Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 (2007-2016)\u003c\/li\u003e\n\u003cli\u003eEngines: T5 \/ 2.5T (5-cyl)\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011-2016) – T5 \/ 2.5T (5-cyl)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2011-2016) – T5 \/ 2.5T (5-cyl)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2014) – T5 \/ 2.5T (5-cyl)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2008-2014) – T5 \/ 2.5T (5-cyl)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2007-2014) – T5 \/ 2.5T (5-cyl)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Cold Air Intake System\u003c\/li\u003e\n\u003cli\u003eDO88 article code: LF-130-V70\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Default Title","offer_id":64866065908089,"sku":"LF-130-V70","price":284.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/lf-130-v70_1.webp?v=1791894853"},{"product_id":"volvo-s80-mk2-v70-mk3-do88-turbo-pressure-pipe-kit-intercooler-charge-pipes-tr-230","title":"Volvo S80 Mk2 \/ V70 Mk3 (2007-2015) 2.5T \/ 2.5FT DO88 Turbo Pressure Pipe Kit (Intercooler Charge Pipes)","description":"\u003cp\u003eUpgrade your Volvo S80 Mk2 \/ V70 Mk3 with the genuine DO88 turbo pressure pipe kit (intercooler charge pipes). Built for 2.5T \/ 2.5FT engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe best Volvo V70\/S80 2.5T 2.5FT AFV 2008-15 performance intercooler pipe kit on the market!\u003c\/p\u003e\n\u003cp\u003eThis is the kit for you with high horsepower goals and want to upgrade to the absolute best! Our pressure pipe has considerably better airflow than the stock pipe, this we have verified in several tests both in car and our own SuperFlow SF-1020 flow bench.\u003c\/p\u003e\n\u003cp\u003eSignificant advantages with do88 pressure pipes (OEM pipes):\n– Air flow at 0,125bar\/1,81psi pressure drop: 540CFM (368CFM), do88 47% higher! See diagram below!\n– Designed to handle high pressure and temperatures!\n– Fits all cars in list below!\u003c\/p\u003e\n\u003cp\u003eThis pressure pipe is manufactured in 2,5” mandrel bent seamless aluminium pipe, and paired together with custom made high quality silicone hoses with 4 layers of polyester\/aramid reinforcement. These hoses can handle very high temperatures and pressure.\u003c\/p\u003e\n\u003cp\u003eAlways remember that the OEM intercooler pipes and hoses were designed for the power level the car was built with and a power increase or even very hard use of the car in a standard version may cause that the OEM pipes and hoses don’t have the performance you need.\nSo only after engine software tune do88 pressure pipes will give a performance increase over the OEM pipes.\u003c\/p\u003e\n\u003cp\u003edo88 pressure pipes come with all hardware necessary for installation.\u003c\/p\u003e\n\u003cp\u003eIncluded parts in this kit:\n1. Aluminium pressure pipe\n2. Three silicone hoses\n3. Six standard hose clamps\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eEquivalent Volvo part numbers: 30636784, 30636785, 30636786, 30636787 (for cross reference only) \u003c\/em\u003e\n\u003cem\u003edo88 ref TR-230\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Turbo Pressure Pipe Kit (Intercooler Charge Pipes) for Volvo S80 Mk2 \/ V70 Mk3 (2007-2015)\u003c\/li\u003e\n\u003cli\u003eEngines: 2.5T \/ 2.5FT\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2007-2012) – 2.5T \/ 2.5FT\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2015) – 2.5T \/ 2.5FT\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Turbo Pressure Pipe Kit (Intercooler Charge Pipes)\u003c\/li\u003e\n\u003cli\u003eDO88 article code: TR-230\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S80 Mk2 \/ V70 Mk3 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Default Title","offer_id":64866066399609,"sku":"TR-230","price":284.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/tr-230_large_3eead03b-b1cf-4e13-a33d-b2b65684203d.jpg?v=1791894864"},{"product_id":"volvo-s60-mk1-v70-mk2-xc70-mk1-s80-mk1-do88-performance-alloy-radiator-wc-210","title":"Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 (2000-2009) All engines inc. R DO88 Performance Alloy Radiator","description":"\u003cp\u003eUpgrade your Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 with the genuine DO88 performance alloy radiator. Built for All engines inc. R engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSuitable for both petrol and diesel engined cars.\u003c\/p\u003e\n\u003cp\u003eThis radiator fits all models with manual transmission and both no turbo and turbo models. Will not fit cars with automatic transmission since it does not have the built in oil cooler. Made from 100% aluminum construction with 40mm thick core with only 6mm tube spacing (OEM has 8mm tube spacing)!\u003c\/p\u003e\n\u003cp\u003ePlease read this before you order this radiator! – The tanks on this radiator are not rounded like the OEM radiator tanks which leaves a bit less space for the intercooler hose connections. It will fit with the OEM intercooler and most aftermarket intercoolers, but some other aftermarket intercoolers might have a bit shorter distance between the hose connections which makes it hard\/impossible to install this radiator.\nIf you have an aftermarket intercooler not from DO88 just measure the distance between the hose connections and it should be 72cm or more to be able to install this radiator.\u003c\/p\u003e\n\u003cp\u003eSpecification:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMaterial – 100% Aluminium\u003c\/li\u003e\n\u003cli\u003eCore size – 620x418x40mm\u003c\/li\u003e\n\u003cli\u003eCore model – 6mm tube spacing, OEM has 8mm.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eIt is very important when installing this radiator to flush the engine completely to clear all old coolant and refil the system ONLY with genuine Volvo coolant (anti Freeze) and distilled water. Failure to do so may invalidate the manufacturers warranty, and lead to premature failure of the aluminium welds. This is because charged particles caused by a mix of coolant types or even in tap water can effect the welds of all aluminium radiators over a period of time. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAssembly: Mounts on the original position. Screws, clips and bushings are reused from the OEM radiator.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eEquivalent Volvo part number 8602413 (for cross reference only), DO88 reference WC-210-MAN\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Performance Alloy Radiator for Volvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 (2000-2009)\u003c\/li\u003e\n\u003cli\u003eEngines: All engines inc. R\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk1 (2001-2009) – All engines inc. R\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk2 (2000-2008) – All engines inc. R\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk1 (2001-2008) – All engines inc. R\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk1 (2000-2006) – All engines inc. R\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Performance Alloy Radiator\u003c\/li\u003e\n\u003cli\u003eDO88 article code: WC-210-AUT, WC-210-MAN\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk1 \/ V70 Mk2 \/ XC70 Mk1 \/ S80 Mk1 owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Manual","offer_id":64866067153273,"sku":"WC-210-MAN","price":397.81,"currency_code":"GBP","in_stock":true},{"title":"Automatic","offer_id":64866067186041,"sku":"WC-210-AUT","price":408.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/pfv908837_large_5586bb15-6f23-4b33-9797-58b5766838a3.jpg?v=1791894870"},{"product_id":"volvo-s60-mk2-v60-mk1-v70-mk3-xc70-mk2-s80-mk2-xc60-mk1-v40-v40-cross-country-do88-performance-alloy-radiator-wc-340","title":"Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 \/ V40 \/ V40 Cross Country (2007-2019) All engines DO88 Performance Alloy Radiator","description":"\u003cp\u003eUpgrade your Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 \/ V40 \/ V40 Cross Country with the genuine DO88 performance alloy radiator. Built for All engines engines, it is a direct-fit, OEM-replacement upgrade for better flow, cooling and durability on standard and tuned cars alike – sold by ÄLG Performance, UK Volvo performance specialists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFits\u003c\/em\u003e:    \u003c\/p\u003e\n\n\u003cli\u003eVolvo V40 2012-2019, Engine Variant: All\u003c\/li\u003e\n\u003cli\u003eVolvo S60 2011-2018, Engine Variant: All\u003c\/li\u003e\n\u003cli\u003eVolvo V60 2011-2018, Engine Variant: All\u003c\/li\u003e\n\u003cli\u003eVolvo XC60 2009-2017, Engine Variant: All\u003c\/li\u003e\n\u003cli\u003eVolvo V70 2008-2016, Engine Variant: All\u003c\/li\u003e\n\u003cli\u003eVolvo XC70 2008-2016, Engine Variant: All\u003c\/li\u003e\n\u003cli\u003eVolvo S80 2007-2016, Engine Variant: All\u003c\/li\u003e\n\n\n\u003cp\u003edo88 proudly presents this self-developed performance radiator for Volvo V40 S60 V60 XC60 V70 XC70 S80!\u003c\/p\u003e\n\u003cp\u003eSignificant advantages of the do88 radiator compared to original:\n– 32 % bigger core volume, 11 467cm3 vs 8 655cm3\n– High efficient core with 6,25mm fin height of multi-louvered design.\n– Dual core design, 2 row 36mm thick core.\n– Fits all cars in list below!\n– Easy installation. (See installation instructions)\u003c\/p\u003e\n\u003cp\u003e\nThis radiator is constructed to deliver the best cooling efficiency during tough conditions. \nExclusively manufactured in aluminum with uninterrupted welds, it guarantees reliability and endurance when you really need it. \nThe increased core volume improves cooling efficiency and lower the liquid temperature. \u003c\/p\u003e\n\u003cp\u003eNaturally, this being a do88 performance product, we have executed thorough, severe and continuous tests developing this product to ensure best performance. Not one compromise has been made. \nThis radiator is immensely optimized to the given space for an easy drop-in-fitment. \nThis is the undoubted choice for the inspired enthusiast or the race car driver demanding reliability at the limit. We take comfort in saying this radiator will fulfill your needs! No more cracked plastic tanks, choose do88 today!\u003c\/p\u003e\n\u003cp\u003eWhen using an all alloy radiator, only genuine Volvo coolant together with distilled water or waterless coolant should be used in your engine. \u003c\/p\u003e\n\n\u003cp\u003eEquivalent Volvo part numbers: 31368082, 31368059, 31293689, 31319064, 31319065 (\u003cem\u003efor cross reference only\u003c\/em\u003e) \u003c\/p\u003e\n\u003cp\u003edo88 ref WC-340\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \/ Selling Points\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO88 Performance Alloy Radiator for Volvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 \/ V40 \/ V40 Cross Country (2007-2019)\u003c\/li\u003e\n\u003cli\u003eEngines: All engines\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested by do88 in Sweden\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM part – no cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA list of which vehicles the product fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S60 Mk2 (2011-2018) – All engines\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V60 Mk1 (2011-2018) – All engines\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V70 Mk3 (2008-2016) – All engines\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC70 Mk2 (2008-2016) – All engines\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo S80 Mk2 (2007-2016) – All engines\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo XC60 Mk1 (2009-2017) – All engines\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolvo V40 \/ V40 Cross Country (2012-2019) – All engines\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease check your engine type and model year against the list above before ordering; contact us if in doubt.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DO88 (do88, Sweden)\u003c\/li\u003e\n\u003cli\u003ePart type: Performance Alloy Radiator\u003c\/li\u003e\n\u003cli\u003eDO88 article code: WC-340\u003c\/li\u003e\n\u003cli\u003eContents: as described by the manufacturer above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo S60 Mk2 \/ V60 Mk1 \/ V70 Mk3 \/ XC70 Mk2 \/ S80 Mk2 \/ XC60 Mk1 \/ V40 \/ V40 Cross Country owners upgrading cooling, boost or intake components\u003c\/li\u003e\n\u003cli\u003eTuned and remapped cars where OEM parts are a limitation\u003c\/li\u003e\n\u003cli\u003eTrack-day and fast-road drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e DO88 parts are bolt-on replacements; professional fitment is recommended if you are not confident working on cooling or boost systems.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Default Title","offer_id":64866067317113,"sku":"WC-340","price":378.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/files\/wc-340_2_large_c0b4816c-0db4-4600-9aa3-54be60fe8303.jpg?v=1791894872"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0255\/2453\/5348\/collections\/Volvo_S80_Collection_ALG_Performance.jpg?v=1790771943","url":"https:\/\/algperformance.co.uk\/collections\/s80.oembed?page=2","provider":"ÄLG Performance","version":"1.0","type":"link"}